| Brand | Bumpon |
|---|---|
| Application Type | Bond |
| 1 Part or 2 Part | 1 Part |
| Substrate | stacked glass, Metal, polypropylene, Low Surface Energy Natural Rubber (R-30), ABS , Aluminum , Stainless Steel , Glass, Polystyrene |
| Industry | Electronics: Keyboards, Electronics: Board rigidity in printed circuit board assembly, Transportation: Automotive, Transportation |
| Manufacturer | 3M |
| Chemistry | Natural Rubber, Plasticizer-free, Polyurethane |
| Cure Method | Pressure Sensitive |
| Color | Black, Brown, Gray, White |
| Chemical Resistance | Detergent in water, Ammonia in water, Bleach, Hydrochloric Acid, Diesel Fuel, Auto Oil, Isopropyl Alcohol, Heptane |
| High Temperature Resistance (°C) | 66, 107 |
| Low Temperature Resistance (°C) | -34 |
| Other Resistance | Excellent skid resistance, marring, staining, Aging resistance |
| Key Specifications | UL Recognized |
To obtain maximum adhesion, surfaces must be unified, dry, and free of contaminants. Surface contact is essential to adhesive performance. To maximize contact on a substrate: Clean surfaces with low strength solvent such as isopropyl alcohol (rubbing alcohol) or heptane.
Note: Be sure to follow the manufacturer’s precautions and directions for use when using solvents.
Apply firm pressure to help increase the cold flow and contact of the adhesive with the substrate
Allow time (dwell) to increase the surface contact and adhesion (see illustrations below).
| sed sed ut. | adipiscing lorem ipsum. | lorem dolor. |
|---|---|---|
| elit nonummy tincidunt ipsum. | magna. | ut. |
| euismod. | erat. | elit sed. |
| aliquam amet laoreet amet. | laoreet. | ipsum nonummy. |
| magna adipiscing. | consectetuer consectetuer. | tincidunt. |
| euismod consectetuer. | elit ut amet. | adipiscing. |
| sit sed. | diam. | adipiscing euismod. |
| dolor dolore diam sit. | nibh. | euismod. |
|---|---|---|
| ut aliquam erat nonummy. | nibh aliquam dolor. | lorem. |
| sed diam. | erat amet dolor. | consectetuer lorem. |
| sit adipiscing amet nonummy. | laoreet nibh euismod. | laoreet. |
|---|---|---|
| aliquam ut elit euismod. | aliquam. | elit lorem. |
| diam consectetuer. | aliquam. | dolor. |
ipsum euismod elit consectetuer consectetuer erat euismod sit. sit lorem sed nibh laoreet sit nonummy tincidunt.
nibh lorem tincidunt erat sed dolore. dolore dolor laoreet magna ut consectetuer. ut aliquam diam dolore laoreet dolor.
erat nibh adipiscing laoreet dolor nonummy diam adipiscing. sed euismod aliquam diam sed magna dolore consectetuer. sed ut tincidunt euismod consectetuer elit laoreet nibh. diam magna dolore magna consectetuer dolore euismod tincidunt.
sit sed sit amet nonummy lorem sed magna diam. sed euismod ipsum erat dolor euismod laoreet ut consectetuer.
| Shear Strength | Type | Substrate | Test Temperature | Test Method |
|---|---|---|---|---|
| Good | Dynamic shear strength | Natural Rubber (R-30) | Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures. | |
| Excellent | Static Shear Strength | Natural Rubber (R-30) | 25°C | Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures. |
| Good | Static Shear Strength | Natural Rubber (R-30) | 49°C | Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures. |
| Poor | Static Shear Strength | Natural Rubber (R-30) | 70°C | Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures. |
| Tensile Strength | Test Method |
|---|---|
| 600 psi | ASTM-D412, Die A, These properties were run on sheet material from the same materials as the individual Bumpon products |
| Peel Strength | Type | Substrate | Test Method |
|---|---|---|---|
| Good | Low Surface Energy Natural Rubber (R-30) | Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures | |
| Good | Low Surface Energy Natural Rubber (R-30) | Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures | |
| 25 (oz. Per 1/2 inch) | 90° Peel Adhesion | Polypropylene | Natural Rubber R-30, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
| 25 (oz. Per 1/2 inch) | 90° Peel Adhesion | Polystyrene | Natural Rubber R-30, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
| 25 (oz. Per 1/2 inch) | 90° Peel Adhesion | ABS | Natural Rubber R-30, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
| 22 (oz. Per 1/2 inch) | 90° Peel Adhesion | Stainless Steel | Natural Rubber R-30, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
| 22 (oz. Per 1/2 inch) | 90° Peel Adhesion | Aluminum | Natural Rubber R-30, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
| General Bond Strength | Substrate | Test Method |
|---|---|---|
| Good | Low Surface Energy Natural Rubber (R-30) | Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures |
| Good | Low Surface Energy Natural Rubber (R-30) | Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures |
| Excellent load bearing capacity |
| Abrasion Resistance | Test Method |
|---|---|
| Abrasion resistance | ASTM-C501, Taber H18, 1kg) g/1000 cycles |
| Other Resistance | Test Method |
|---|---|
| Excellent skid resistance | |
| marring | |
| staining | 3M-24 hours @ 158°F against white paint 7 days exposed to UV |
| Aging resistance |
| Dielectric Strength | Test Method |
|---|
| Elongation | Test Method |
|---|---|
| 100 % | ASTM-D412, Die A, These properties were run on sheet material from the same materials as the individual Bumpon products |
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
Great! Contact us if you have any additional questions.
You will lose your saved materials unless you register. Please register.
| Manufacturer | Material | Remove |
|---|
Things you can do with checked materials:
| Name | Save Date | View |
|---|
Need help? Our knowledgeable experts help you achieve your goals by giving you application insights. They are available personally to help you before, during or after your search.
