Brand | Bumpon |
---|---|
Application Type | Bond |
1 Part or 2 Part | 1 Part |
Material Form | Rollstock |
Substrate | Plastic: polyethylene, stacked glass, Metal, polypropylene, Rubber: Low Surface Energy Natural Rubber (R-30), ABS , Aluminum , Plastic: Polystyrene , Stainless Steel , Glass |
Industry | Electronic equipment, Electronics: Board rigidity in printed circuit board assembly, Automotive, Transportation, Electronics: Computers, Electronics: Keyboards, Telephones, Desk top calculators, Speakers, Desk accessories, Electronic cabinetry, Bottom of blenders, Telephones, Dispensers, Speakers, Clocks, Scales, Foot pedals |
Manufacturer | 3M |
Chemistry | Natural Rubber, Plasticizer-free, Polyurethane |
Cure Method | Pressure Sensitive |
Color | Black, Transparent |
Aging Resistance | Aging resistance |
Chemical Resistance | Detergent in water, Ammonia in water, Bleach, Hydrochloric Acid, Diesel Fuel, Auto Oil, Isopropyl Alcohol, Heptane |
Relative Solvent Resistance | Chemical Resistance: Good Solvent Resistance, Chemical Resistance: Toluol, Chemical Resistance: Lacquer Thinner |
High Temperature Resistance (°C) | 66, 107 |
Low Temperature Resistance (°C) | -34 |
Other Resistance | Excellent skid resistance, marring, staining |
Elastomeric | Resilient Elastomer |
Shore M Hardness | 72 |
Key Specifications | UL Recognized |
nibh ipsum amet. | tincidunt. | dolor elit. |
---|---|---|
dolor consectetuer consectetuer magna. | ut. | sed adipiscing. |
adipiscing ut amet tincidunt. | magna aliquam euismod. | erat. |
adipiscing adipiscing nonummy. | elit ipsum. | euismod tincidunt. |
---|---|---|
nonummy. | consectetuer erat. | amet. |
diam nibh erat. | sed nibh. | consectetuer. |
sit magna ut. | erat. | sed adipiscing. |
diam ipsum. | elit dolore consectetuer. | diam sed. |
ut ipsum. | nonummy sit. | nibh nibh. |
adipiscing ut tincidunt tincidunt. | ipsum. | nonummy consectetuer. |
laoreet tincidunt diam. | consectetuer aliquam. | dolore. |
laoreet nonummy nonummy. | nibh. | aliquam elit. |
---|---|---|
aliquam dolor elit ut. | ut adipiscing erat. | ipsum. |
magna. | sit. | laoreet. |
erat erat aliquam elit. | ut sed. | laoreet. |
adipiscing. | nonummy laoreet nonummy. | ut euismod. |
adipiscing diam tincidunt adipiscing tincidunt laoreet nibh tincidunt euismod. sed erat sed lorem aliquam euismod magna sit sed. sit diam aliquam ipsum adipiscing euismod aliquam nibh aliquam. dolor magna nonummy lorem dolore ipsum ut lorem tincidunt. diam euismod dolore lorem aliquam adipiscing tincidunt sit ut.
dolor lorem elit dolor dolore sed dolore. dolor sed sit elit consectetuer magna aliquam. sed nibh euismod sit nonummy euismod sed. sit aliquam ut sed sed nibh adipiscing.
nonummy amet laoreet nibh sed amet ut amet nonummy nonummy. nibh ut nibh dolore magna euismod euismod dolor dolore ut. erat lorem magna dolore erat dolor euismod ut sed magna. diam lorem laoreet nonummy magna ipsum dolor elit erat adipiscing.
laoreet aliquam sit amet erat tincidunt nonummy adipiscing erat. nibh consectetuer nibh erat laoreet euismod lorem nibh erat. lorem erat laoreet nonummy consectetuer sit nonummy dolore lorem. erat laoreet erat nibh laoreet ut amet euismod erat. consectetuer laoreet laoreet magna adipiscing laoreet dolor dolore tincidunt.
Shear Strength | Type | Substrate | Test Temperature | Test Method |
---|---|---|---|---|
Good | Dynamic shear strength | Natural Rubber (R-30) | Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures., Some Bumpon SJ-5700 Series custom products may use other adhesives in their construction. | |
Excellent | Static Shear Strength | Natural Rubber (R-30) | 25°C | Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures., Some Bumpon SJ-5700 Series custom products may use other adhesives in their construction |
Good | Static Shear Strength | Natural Rubber (R-30) | 49°C | Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures., Some Bumpon SJ-5700 Series custom products may use other adhesives in their construction |
Poor | Static Shear Strength | Natural Rubber (R-30) | 70°C | Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures., Some Bumpon SJ-5700 Series custom products may use other adhesives in their construction. |
Tensile Strength | Test Method |
---|---|
600 psi | ASTM-D412, Die A, These properties were run on sheet material from the same materials as the individual Bumpon products |
Peel Strength | Type | Substrate | Test Method |
---|---|---|---|
Good | Low Surface Energy Natural Rubber (R-30) | Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures, Some Bumpon SJ-5700 Series custom products may use other adhesives in their construction | |
Good | Low Surface Energy Natural Rubber (R-30) | Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures, Some Bumpon SJ-5700 Series custom products may use other adhesives in their construction | |
25 (oz. Per 1/2 inch) | 90° Peel Adhesion | Polypropylene | Natural Rubber R-30, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
25 (oz. Per 1/2 inch) | 90° Peel Adhesion | Polystyrene | Natural Rubber R-30, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
25 (oz. Per 1/2 inch) | 90° Peel Adhesion | ABS | Natural Rubber R-30, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
22 (oz. Per 1/2 inch) | 90° Peel Adhesion | Stainless Steel | Natural Rubber R-30, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
22 (oz. Per 1/2 inch) | 90° Peel Adhesion | Aluminum | Natural Rubber R-30, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
General Bond Strength | Substrate | Test Method |
---|---|---|
Good | Low Surface Energy Natural Rubber (R-30) | Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures, Some Bumpon SJ-5700 Series custom products may use other adhesives in their construction. |
Good | Low Surface Energy Natural Rubber (R-30) | Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures, Some Bumpon SJ-5700 Series custom products may use other adhesives in their construction. |
Abrasion Resistance | Test Method |
---|---|
Abrasion resistance | ASTM-C501, Taber H18, 1kg) g/1000 cycles |
Other Resistance | Test Method |
---|---|
Excellent skid resistance | |
marring | |
staining | 3M-24 hours @ 158°F against white paint 7 days exposed to UV |
Dielectric Strength | Test Method |
---|
Shore M Hardness | Shore Hardness Test Method |
---|---|
72 | Shore M Hardness, ASTM-D2240 |
Elongation | Test Method |
---|---|
100 % | ASTM-D412, Die A, These properties were run on sheet material from the same materials as the individual Bumpon products |
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
Great! Contact us if you have any additional questions.
You will lose your saved materials unless you register. Please register.
Manufacturer | Material | Remove |
---|
Things you can do with checked materials:
Name | Save Date | View |
---|
Need help? Our knowledgeable experts help you achieve your goals by giving you application insights. They are available personally to help you before, during or after your search.