3M Wood Adhesive Scotch-Weld Medium Set Wood Epoxy

3M Wood Adhesive Scotch-Weld Medium Set Wood Epoxy Datasheet
  • Description for 3M Wood Adhesive Scotch-Weld Medium Set Wood Epoxy

    • Bond wood, solid surfaces, and other substrates with a fast set time of 3-4 minutes or 40-45 minutes depending on production requirements • Choice of self-leveling or non-sag formulations

    *See Terms of Use Below

    Application Type Bond, Repair
    1 Part or 2 Part 2 Part
    Material Form Liquid
    Substrate Steel, Wood, Pine, Oak, Plywood, MDF
    Industry Stripped screws
    Manufacturer 3M
    Chemistry Epoxy
    Cure Method 2-Part Cure
    Viscosity (cPs) 10,000
    Color Translucent
  • Technical Data for 3M Wood Adhesive Scotch-Weld Medium Set Wood Epoxy

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1 Part or 2 Part - 2 Part
    • Material Form
      • Liquid
    • Substrate
      • Steel
      • Wood - Pine, Oak, Plywood, MDF
      • Other - solid surface, slivers
    • Industry
      • Mechanical Fastening Parts - Stripped screws
      • Furniture / Wood-Working - Woodworking, Furniture, Cabinetry
      • Other - Fill gaps
    • Chemistry
    • Application Method
      • Other - squeeze bottle
    • Cure Method
      • 2-Part Cure
    • Color
      • Translucent
    Specifications
    Cure Specs
    Viscosity (cPs) 10,000
    Fixture or Handling Strength Time (min) 480
    Set Time (min) Medium, 3.00 to 4.00, 40 to 45
    Work / Pot Time (min) 45 Test Method
    Bond Strength
    Structural/Load-Bearing Structural
    Shear Strength (psi) High, High, High, High, High, High Test Method
  • Best Practices for 3M Wood Adhesive Scotch-Weld Medium Set Wood Epoxy

    *See Terms of Use Below

  • Comparable Materials for 3M Wood Adhesive Scotch-Weld Medium Set Wood Epoxy

    *See Terms of Use Below

    Spec Engine® Results

Questions about this material?

Get personal assistance with your specific application needs.

Your Profile Edit
  1. 2310bfaa-f9f9-44d9-a385-d610748d1f2a
  2. 2310bfaa-f9f9-44d9-a385-d610748d1f2a

Popular Articles

Testing the effectiveness of surface treatments

Read Article

Epoxies in the Medical Device Industry

Read Article

Electrically Conductive Adhesives

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

Which answer best describes a project you are currently working on?
Work / Pot Time Test Methods
Work / Pot Time Test Method
45 min Approximate
Shear Strength Test Methods
Shear Strength Type Substrate Test Method
High Overlap shear strength Pine High = typically provide substrate failure (adhesive bond stronger than material itself) or at least 800 psi overlap shear strength
High Overlap shear strength Oak High = typically provide substrate failure (adhesive bond stronger than material itself) or at least 800 psi overlap shear strength
High Overlap shear strength Plywood High = typically provide substrate failure (adhesive bond stronger than material itself) or at least 800 psi overlap shear strength
High Overlap shear strength MDF High = typically provide substrate failure (adhesive bond stronger than material itself) or at least 800 psi overlap shear strength
High Overlap shear strength Polyurethane Finish High = typically provide substrate failure (adhesive bond stronger than material itself) or at least 800 psi overlap shear strength
High Overlap shear strength Steel High = typically provide substrate failure (adhesive bond stronger than material itself) or at least 800 psi overlap shear strength