• Description for Bostik 1142M

    Fast drying; high green strength; heat and moisture resistant.

    Note: This material has been discontinued. Please view the Comparable Materials tab or call us at (262) 293-7970 for additional help.

    *See Terms of Use Below

    Chemical Resistance Chemical Resistance: Fluid Resistance: Water
    Application Type Bond
    1 Part or 2 Part 1-Part
    Material Form Liquid
    Substrate Aluminum, Cotton, Metal, Neoprene, Rigid plastics, Rubber, Steel, Wood, Concrete, Phenolics, Rubber Foam, ABS, Leather, Fabrics, Rubber Foam
    Manufacturer Bostik
    Chemistry Solvent-Based
    Cure Method Solvent
    Cure Temperature (°C) 20 to 25
    Cure Time (min) Fast, 5.00 to 7
    Viscosity (cPs) 300
    Color Amber
    High Temperature Resistance (°C) <71
    Density (g/cm³) 0.820, 6.9 (lbs/gal)
    Key Specifications Mil-Spec (United States Military Standard): MMM-A-121
  • Technical Data for Bostik 1142M

    Overview
    • Chemical Resistance
      • Chemical Resistance : Fluid Resistance : Water Resistance - Water
    • Application Type
    • 1 Part or 2 Part
      • 1-Part
    • Material Form
      • Liquid
    • Substrate
    • Industry
      • Industrial - High pressure Laminate, Rubber floor mats
    • Chemistry
    • Application Method
      • Roll - Rollcoat
      • Brush
      • Spray
    • Cure Method
      • Solvent
    • Color
      • Red - Amber
    • Key Specifications
      • Mil-Spec (United States Military Standard) : MMM-A-121
    Specifications
    Cure Specs
    Cure Temperature (°C) 20 to 25
    Cure Time (min) Fast, 5.00 to 7
    Viscosity (cPs) 300
    Green Strength Time (min) Green strength
    Bond Strength
    General Bond Strength (psi) High, 22 to 25 (pli), 20 to 22 (pli), 7 to 10 (pli), 9 to 12 (pli) Test Method
    Material Resistance
    High Temperature Resistance (°C) <71
    Moisture/Humidity Resistance Heat and moisture resistant
    Other Properties
    Flash Point (°F) -18.0
    % Solids (%) 23
    Density (g/cm³) 0.820, 6.9 (lbs/gal)
    Business Information
    Shelf Life (mon) 6
    Not Good For
    Don't Use With Flexible PVC
  • Best Practices for Bostik 1142M

    *See Terms of Use Below

    1. Clean-Up

      Cleanup: toluene, MEK

  • Comparable Materials for Bostik 1142M

    *See Terms of Use Below

    Spec Engine® Results

Popular Articles

Conformal Coatings Guide

Read Article

Testing the effectiveness of surface treatments

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Electrically Conductive Adhesives Guide

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for Bostik 1142M

Gluespec Poll

Which answer best describes a project you are currently working on?
General Bond Strength Test Methods
General Bond Strength Substrate Test Method
High Cotton
22 to 25 (pli) Leather
20 to 22 (pli) Neoprene-Steel
7 to 10 (pli) Neoprene-Aluminum
9 to 12 (pli) Rubber Foam-Foam Stock failure