Bostik 4045 Datasheet Bostik 4045

CONTACT REP
Information provided by Gluespec

  • Description for Bostik 4045

    Plasticizer migration resistance; solvent resistant; high initial bond strength.

    Note: This material has been discontinued. Please view the Comparable Materials tab or call us at (262) 293-7970 for additional help.

    *See Terms of Use Below

    Chemical Resistance Chemical Resistance: Solvent
    Application Type Bond
    1 Part or 2 Part 1-Part
    Material Form Liquid
    Substrate Fabric, Foam, ABS, Vinyl, PVC, Aluminum, Upholstery, Plastic
    Manufacturer Bostik
    Chemistry Nitrile
    Cure Method Room Temperature Cure
    Cure Time (min) Fast
    Viscosity (cPs) 2,200
    Color Amber
    Density (g/cm³) 0.860, 7.27 (lbs/gal)
    Key Specifications FDA (U.S. Food & Drug Administration) and/or CFIA (Canadian Food Inspection Agency): FDA 12 CFR 175.105

  • Technical Data for Bostik 4045

    *See Terms of Use Below

    Overview
    • Chemical Resistance
      • Chemical Resistance : Relative Solvent Resistance - Solvent
    • Application Type
    • 1 Part or 2 Part
      • 1-Part
    • Material Form
      • Liquid
    • Substrate
    • Chemistry
      • Other - Nitrile
    • Cure Method
      • Room Temperature / Air Dry - Room Temperature Cure
    • Color
      • Red - Amber
    • Key Specifications
      • FDA (U.S. Food & Drug Administration) and/or CFIA (Canadian Food Inspection Agency) : 175.105 - FDA 12 CFR 175.105
    Specifications
    Cure Specs
    Cure Time (min) Fast
    Viscosity (cPs) 2,200
    Tack Free Time (min) 5.00 to 7
    Work / Pot Time (min) 0.25 to 0.33
    Bond Strength
    General Bond Strength (psi) High initial strength, 18 to 20 (pli), 16 to 18 (pli), 16 to 18 (pli), 18 to 22 (pli), 18 to 22 (pli) Test Method
    Hardness
    Flexibility Flexible
    Other Properties
    Flash Point (°F) 0.0
    % Solids (%) 26
    Density (g/cm³) 0.860, 7.27 (lbs/gal)
    Business Information
    Shelf Life (mon) 12

  • Best Practices for Bostik 4045

    *See Terms of Use Below

    1. Surface Preparation

      Bonding surfaces should be clean and dry.

    2. Application

      Apply adhesive to one surface and allow to dry. Coat other surface and mate two surfaces while tacky (5-7 mins.). Alternate method: coat both surfaces and dry (surfaces will be non-tacky). When ready to bond, wipe one surface with MEK and mate surfaces immediately with uniform pressure.

  • Comparable Materials for Bostik 4045

    *See Terms of Use Below

    Spec Engine® Results

    • Devcon (ITW)
      Zip Grip HV2200(Devcon (ITW))

      High-viscosity, rubber-toughened cyanoacrylate adhesive offering extended temperature resistance and increased flexibility.

    • Devcon (ITW)
      Devcon Rubber Contact Cement(Devcon (ITW))

      An industrial-strength rubber adhesive for flexible, durable bonds. Bonds rubber, canvas, wood, metal and some plastics. Outstanding resistance to ultraviolet, oils, acids, and alkalis. Repairs, seals, caulks, insulates, and waterproofs.

    • Dymax
      Multi-Cure 9-984-B(Dymax)

      A single component, 100% solids conformal coating specifically formulated for rapid room temperature cure when exposed to UV/Visible light. Upon cure. This thin black coating is excellent for hiding components and board features

    • Compare All

    Closest Results from this Manufacturer

    • Bostik
      Born2Bond TA-43(Bostik)

      A single-component, general purpose medium strength anaerobic adhesive designed to lock and seal threaded fasteners which require normal disassembly with standard hand tools.

    • Bostik
      9575(Bostik)

      One-part moisture cure adhesive; aggressive bonds; elevated temperature resistance.

    • Bostik
      Bron2Bond RA-38(Bostik)

      A medium viscosity, high strength anaerobic adhesive designed to retain cylindrical parts. Once cured the product prevents leakage and/or loosening of parts from vibration and shock.

    • Compare All
  Download Technical Data Sheet   Save This Material   Compare View Saved Items

Popular Articles

Testing the effectiveness of surface treatments

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Lightweighting drives automotive adhesives demand

Read Article

6 objects held together by adhesives you probably can't live without

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Gluespec Poll

Who do you read or follow for engineering news and entertainment?
General Bond Strength Test Methods
General Bond Strength Substrate Test Method
High initial strength Fabric
18 to 20 (pli) Fabric-Vinyl
16 to 18 (pli) Vinyl
16 to 18 (pli) Vinyl-ABS
18 to 22 (pli) Vinyl Foam-Solid Vinyl Foam failure
18 to 22 (pli)