Application Type Bond 1 Part or 2 Part 1 Part Material Form Liquid Substrate Nitrile Rubber Manufacturer Bostik Chemistry Nitrile rubber Cure Method MEK/Acetone Cure Time (min) Fast drying Viscosity (cPs) 8,000, High Color Straw, Clear Density (g/cm³) 0.000 7.34 (lbs/gallon)
Technical Data for Bostik 4145
- Adhesive - Bond
1 Part or 2 Part
- 1 Part or 2 Part - 1 Part
- Nitrile Rubber
- Other - Nitrile rubber
- Solvent - MEK/Acetone
- Clear / Transparent - Clear
- Other - Straw
Cure Time (min) Fast drying Viscosity (cPs) 8,000, High Test Method
Flash Point (°F) 0.0 % Solids (%) 30 Density (g/cm³) 0.000 7.34 (lbs/gallon)
Shelf Life Temperature (°F) 75 Shelf Life (mon) 9
Best Practices for Bostik 4145
Apply sufficient adhesive to each surface and allow to dry. Wipe one surface with MEK and bond with uniform pressure. Alternate method is to apply to one surface and dry at least 20 minutes. Apply to other surface and while still tacky (within 10 minutes) mate two surfaces with firm uniform pressure.
Comparable Materials for Bostik 4145
Spec Engine® Results
Closest Results from this Manufacturer
Questions about this material?
Get personal assistance with your specific application needs.