Bostik 7070

CONTACT REP

Description for Bostik 7070

Two component; flexible bondline; solvent and water resistant; temperature and stress resilient.

Chemical Resistance	Oil, Chemical Resistance: Solvent resistance, Chemical Resistance: Fluid Resistance: Water resistance
Application Type	Bond
1 Part or 2 Part	2-Part
Material Form	Liquid
Substrate	Fabrics, PVC, Foam, Leather
Industry	Splicing arbasive belts
Manufacturer	Bostik
Chemistry	Solvent-Based
Application Method	Knife, Spreader
Cure Method	2 Parts
Cure Temperature (°C)	20 to 25
Cure Time (min)	1,440
Viscosity (cPs)	6,200
Color	Pearl Gray, Pearl Gray, Pearl Gray
High Temperature Resistance (°C)	High temperature resistance
Density (g/cm³)	7.8 (lbs/gal)

Best Practices for Bostik 7070

Register for FREE to view more details

Why register?

View Technical Details
View Test Methods
View Key Specifications
View Similar Materials
Save your Project Searches

See what Gluespec offers

Sign up now Already registered? Sign in!

Email: *

Password: *

Confirm Password: *

Do you prefer to see data in °F or °C?

First Name: *

Last Name: *

Phone: *

Company Name: *

Address: *

Postal Code: *

Country: *

Job Function: *

Industry: *

Describe: *

I agree to the terms of use *

*: Required

Technical Data for Bostik 7070

*See Terms of Use Below

Overview

Chemical Resistance
- Chemical Resistance : Fluid Resistance : Water Resistance
- Chemical Resistance - Oil
- Chemical Resistance : Relative Solvent Resistance - Solvent resistance
Application Type
- Adhesive - Bond
1 Part or 2 Part
- 2-Part
Material Form
- Liquid
Substrate
- Foam
- Leather
- Polyvinyl chloride (PVC) - PVC
- Fabric - Fabrics
Industry
- Industrial - Hock and Look Fasteners, Garments
- Splicing - Splicing arbasive belts
Chemistry
- Solvent-Based
Application Method
- Roll - Rollcoat
- Brush
- Spatula/Trowel - Knife, Spreader
Cure Method
- 2-Part Cure - 2 Parts
Color
- Gray - Pearl Gray
- Off-White - Pearl Gray
- White - Pearl Gray

Specifications

Cure Specs

Cure Temperature (°C)	20 to 25
Cure Time (min)	1,440
Viscosity (cPs)	6,200
Work / Pot Time (min)	480
Mix Ratio	16:1 (by volume)

Material Resistance

High Temperature Resistance (°C)	High temperature resistance

Hardness

Flexibility	Flexible

Other Properties

Flash Point (°F)	8.6
% Solids (%)	21
Density (g/cm³)	7.8 (lbs/gal)

Business Information

Shelf Life (mon)	12

Best Practices for Bostik 7070

*See Terms of Use Below
1. Surface Preparation
  
  Surface Preparation: use clean and dry substrates
2. Application
  
  Application: brush, rollcoat, knife, spreader Surface Preparation: use clean and dry substrates. Mix two parts together to form a uniform mix. Stir occasionally during use. Apply one or two coats to each surface, dry 10-15 mins. And carefully mate surfaces with uniform firm pressure. Can be solvent activated up to 24 hrs. after adhesive application. For splicing abrasive belts, dry 15-45 mins and assemble bonds in a 150F press at 4000-6000 psi. Allow belts to cure 24 hrs. at room temperature before using.
3. Mixing
  
  Mix two parts together to form a uniform mix.
4. Curing
  
  Apply one or two coats to each surface, dry 10-15 mins. And carefully mate surfaces with uniform firm pressure. Can be solvent activated up to 24 hrs. after adhesive application. For splicing abrasive belts, dry 15-45 mins and assemble bonds in a 150F press at 4000-6000 psi. Allow belts to cure 24 hrs. at room temperature before using.
Comparable Materials for Bostik 7070

*See Terms of Use Below

Spec Engine^® Results
- RTVS A-4000(Insulcast (ITW))
  A two component solvent based silicone resin adhesive. It will retain flexibility over an elevated temperature.
- 2402(Bostik)
  Light brown, Marine adhesive. Tough resilient bond. Good adhesion to Hypalon inflatables. Resistant to heat, moisture, acids, alkalis, gasoline, oil and kerosene.
- Compare All