Bostik 7132M

Bostik 7132M Datasheet
CONTACT REP

  • Description for Bostik 7132M

    Versatile; long open time; strong adhesion; excellent edge folding capability; heat and humidity resistant bonds.

    Note: This material has been discontinued. Please view the Comparable Materials tab or call us at (262) 293-7970 for additional help.

    *See Terms of Use Below

    Application Type Bond
    1 Part or 2 Part 2 Part
    Material Form Liquid
    Substrate Porous substrates, Foils, Plastic, PVC, FiberBoards, Sheet Metal surfaces, Plastic laminate, Wood
    Industry Automotive
    Manufacturer Bostik
    Chemistry Linear saturated polyester
    Cure Method Part A/Part B
    Cure Time (min) 1,440
    Viscosity (cPs) 85
    Color Raspberry
    Density (g/cm³) 0.910, 7.67 (lbs/gal)

  • Technical Data for Bostik 7132M

    *See Terms of Use Below

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1 Part or 2 Part - 2 Part
    • Material Form
      • Liquid
    • Substrate
    • Industry
    • Chemistry
      • Other - Linear saturated polyester
    • Application Method
      • Dispenser - Gravure
      • Roll
      • Spray
    • Cure Method
      • 2-Part Cure - Part A/Part B
    • Color
      • Red - Raspberry
    Specifications
    Cure Specs
    Cure Time (min) 1,440
    Viscosity (cPs) 85 Test Method
    Work / Pot Time (min) Long, 480
    Mix Ratio 20:24 (by volume)
    Green Strength Time (min) High
    Bond Strength
    General Bond Strength (psi) Strong
    Material Resistance
    Moisture/Humidity Resistance Excellent
    Other Properties
    Flash Point (°F) 22.0, 14.0 Test Method
    % Solids (%) 25
    Density (g/cm³) 0.910, 7.67 (lbs/gal)
    Business Information
    Shelf Life Temperature (°F) 60 to 80
    Shelf Life (mon) 6

  • Best Practices for Bostik 7132M

    *See Terms of Use Below

    1. Application

      Equipment: direct roll, reverse roll, gravure, or other coater common to the industry. This adhesive can also be sprayed via Graco, Devilbuss, Binks, or similar units. Method: Add Part B to Part A in accordance with the mixing ratio specified above and blend to a homogenous solution (solvent dilutions, where applicable, should be made immediately after the Part B addition).

  • Comparable Materials for Bostik 7132M

    *See Terms of Use Below

    Spec Engine® Results

    • Henkel
      Loctite Ablestik 64C(Henkel)

      A low cost, two component, non-silver, electrically conductive epoxy adhesive.

    • Resinlab
      EP1224NF(Resinlab)

      A two-part electronics grade low viscosity solvent based epoxy coating designed for protecting various materials from exposure to harsh chemical environments.

    • Henkel
      BA-F113(Henkel)

      • Low viscosity • Optically clear • Resistant to mechanical impact • Excellent wettability • Excellent thermal shock resistance • Optical components and LED displays • Room Temperature or Heat Cure

    • Compare All

    Closest Results from this Manufacturer

    • Bostik
      2402(Bostik)

      Light brown, Marine adhesive. Tough resilient bond. Good adhesion to Hypalon inflatables. Resistant to heat, moisture, acids, alkalis, gasoline, oil and kerosene.

    • Compare All
  Download Technical Data Sheet   Save This Material Saved Items

Questions about this material?

Get personal assistance with your specific application needs.

Your Profile Edit
  1. 85cd968c-5169-4610-875b-84cf3567a945
  2. 85cd968c-5169-4610-875b-84cf3567a945
Submit

Popular Articles

Lightweighting drives automotive adhesives demand

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Testing the effectiveness of surface treatments

Read Article

6 objects held together by adhesives you probably can't live without

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

Which answer best describes a project you are currently working on?
Viscosity Test Methods
Viscosity Test Method
85 cPs Brookfield LVF#1/60/25 C
Flash Point Test Methods
Flash Point Test Method
-5.6°C Flash Point Test Method
-10.0°C SCC