Application Type Bond 1 Part or 2 Part 1 Part Material Form Liquid Manufacturer Bostik Chemistry water-dispersible aliphatic polyisocyanate, acrylics, polyurethanes Viscosity (cPs) 250 Color Blue liquid Relative Solvent Resistance Chemical Resistance: solvents resistance High Temperature Resistance (°C) Heat resistance
Technical Data for Bostik BOSC132-59
- Adhesive - Bond
1 Part or 2 Part
- 1 Part or 2 Part - 1 Part
- Other - polychloroprenes
- Blue - Blue liquid
Viscosity (cPs) 250 Test Method Work / Pot Time (min) 360
High Temperature Resistance (°C) Heat resistance Moisture/Humidity Resistance moisture resistance
Flash Point (°F) 302.0 Test Method
Shelf Life Details Boscodur 132 must be stored in airtight containers at 55-80°F. Aside from original container, it may be stored in aluminum or glass containers using screw closures with polyethylene seals. Containers releasing alkaline substances are not acceptable. Shelf life in original unopened containers is at least six months at 55-80°F. Partially filled containers should be blanketed with dry nitrogen and properly resealed. Moisture, including atmospheric humidity, will spoil this curing agent. Shelf Life Temperature (°F) 131 to 176 Shelf Life (mon) >6
Best Practices for Bostik BOSC132-59
Boscodur 132 is added directly to the aqueous adhesive dispersion under low to moderate speed mechanical agitation just prior to use. Mix for approximately 10 minutes. Avoid high speed, high shear mixing which might introduce air into the adhesive. Typical pot life is about 6 hours
this varies with the type of adhesive. Do not seal containers tightly after mixing, as small amounts of carbon dioxide may be liberated. Typical levels of use are 3-7% by weight based upon the weight of the aqueous dispersion. Refer to individual Bostik product data sheets for recommended level of use.
Comparable Materials for Bostik BOSC132-59
Spec Engine® Results
Closest Results from this Manufacturer
Questions about this material?
Get personal assistance with your specific application needs.