Bostik ISR 70-03A-SKF

Bostik ISR 70-03A-SKF Datasheet
  • Description for Bostik ISR 70-03A-SKF

    High quality adhesive / sealant; very good adhesion on some substrates without the use of primer ; solvent free; neutral cure; long open time.

    *See Terms of Use Below

    Application Type Bond, Seal
    1 Part or 2 Part 1 Part
    Material Form Paste
    Substrate Copper, Glass, Aluminium, Polyester, PVC, Galvanised steel, Painted and lacquered wood, Stainless Steel, Brass, Zinc, Powder coated metal
    Industry Caravan, Roofs on trains, Roofs on buses, Roofs on trucks, Polyester on trailers
    Manufacturer Bostik
    Chemistry SMP (Silyl Modified Polymer), PVC-free, Isocyanate-free, Solvent-free
    Cure Method Moisture
    Cure Temperature (°C) 20
    Cure Time (min) Fast, >1,440
    Color Black, Gray, White
    High Temperature Resistance (°C) 120, 180
    Low Temperature Resistance (°C) -40
  • Technical Data for Bostik ISR 70-03A-SKF

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1 Part or 2 Part - 1 Part
    • Material Form
      • Paste
    • Substrate
    • Industry
      • Other Transportation - Sunroof systems
      • Rail - Roofs on trains
      • Bus - Roofs on buses
      • Trucks - Roofs on trucks
      • Trailer - Polyester on trailers
      • Automotive - Caravan
      • Industrial - Corner profiles of aluminium, Polyester parts on metal frames, Welded seams
      • Construction - Floor systems
    • Chemistry
      • Solvent-Free - PVC-free, Isocyanate-free
      • Silyl Modified Polymer (SMP) / MS Polymer - SMP (Silyl Modified Polymer)
    • Application Method
      • Dispenser - Air-pressure gun, Handgun
    • Cure Method
      • Moisture / Condensation Cure - Moisture
    • Color
      • Black
      • Gray
      • White
    Specifications
    Cure Specs
    Application Temperature (°F) 41 to 95
    Cure Temperature (°C) 20 Test Method
    Cure Time (min) Fast, >1,440 Test Method
    Open Time Temperature (°C) 20
    Tack Free Time (min) 10 Test Method
    Work / Pot Time (min) Long
    Open Time (min) <30
    Bond Strength
    General Bond Strength (psi) very good
    Shear Strength (psi) 360 Test Method
    Green Strength (psi) 300 (Pa) Test Method
    Tensile Strength (psi) 245, 375 Test Method
    Material Resistance
    UV Resistance Excellent, Very Good
    Environmental Resistance Excellent
    High Temperature Resistance (°C) 120, 180
    Low Temperature Resistance (°C) -40
    Moisture/Humidity Resistance Moisture/humidity resistance
    Hardness
    Shore A Hardness 55 Test Method
    Elongation (%) 250 Test Method
    Flexibility Permanently elastic
    Modulus (psi) 475 Test Method
    Other Properties
    Specific Gravity 1.4 (g/ml)
    Business Information
    Shelf Life Details Bostik® 70-03A-SKF may be stored for 12 months in closed (unopened) sausages in a dry place at temperatures between 40°F and 90°F (5°C and 30°C).
    Shelf Life Temperature (°F) 41 to 86
    Shelf Life (mon) 12
    Not Good For
    Don't Use With untreated polyethylene, polypropylene, teflon.
  • Best Practices for Bostik ISR 70-03A-SKF

    *See Terms of Use Below

    1. Application

      Bostik® 70-03A-SKF can easily be extruded with a handgun or air-pressure gun at temperatures between 45°F to 100°F (5°C to 35°C). In sealing applications, Bostik® 70-03A-SKF should be tooled or finished within 10 minutes (at 20°C/50% R.H.) with a spatula or putty knife, occasionally moistened with a soap solution. Avoid soap solution penetrating between joint sides and sealant which will result in loss of adhesion. In bonding applications, the substrates have to be assembled within 25 minutes (at 20°C/50% R.H.) after applying Bostik® 70-03A-SKF. In general, an adhesive thickness of 0.062-in. or 1/16-in. (2 mm) is recommended.

    2. Clean-Up

      Cleaning tools or removing uncured residue of Bostik® 70-03A-SKF can be done with a clean white/colorless cloth, moistened with IPA (Isopropyl alcohol). Check substrate compatibility with IPA (Isopropyl alcohol) before proceeding.

  • Comparable Materials for Bostik ISR 70-03A-SKF

    *See Terms of Use Below

    Spec Engine® Results

Questions about this material?

Bostik - ISR 70-03A-SKF

Get personal assistance with your specific application needs.

Your Profile Edit

Popular Articles

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

What Are the Differences Between Adhesives and Sealants?

Read Article

Testing the effectiveness of surface treatments

Read Article

Anaerobic Adhesives

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

Which answer best describes a project you are currently working on?
Cure Temperature Test Methods
Cure Temperature Cure Time Test Method
20°C Cure rate after 24 hours, 0.125 in., ca. 3 mm, 70°F/20°C @ 50% R.H.
Cure Time Test Methods
Cure Time Test Method
Fast
>1,440 min Cure rate after 24 hours, 0.125 in., ca. 3 mm, 70°F/20°C @ 50% R.H.
Tack Free Time Test Methods
Tack Free Time Tack Free Temperature Test Method
10 min 20°C 70°F/20°C @ 50% R.H.
Green Strength Test Methods
Green Strength Test Method
300 (Pa) Physica Rheometer MC100
Tensile Strength Test Methods
Tensile Strength Test Method
245 psi Tensile stress 100%, DIN 53504/ISO 37
375 psi Tensile stress at break, DIN 53504/ISO 37
Shear Strength Test Methods
Shear Strength Substrate Test Method
360 psi Aluminum-to-Aluminum DIN 53283/ASTM D1002, adh. thickness 0.062-in. or 1/16-in. (2mm), test speed 2-in./min. (50 mm/min.)
Elongation Test Methods
Elongation Test Method
250 % DIN 53504/ISO 37, at Break
Modulus Test Methods
Modulus Test Method
475 psi E-Modulus 10%, DIN 53504/ISO 37
Shore A Hardness Test Methods
Shore A Hardness Shore Hardness Test Method
55 DIN 53505