Application Type Bond 1 Part or 2 Part 1 Part Material Form Liquid Substrate Vinyl, Rigid, Metal, Aluminum, Natural Fabrics, Urethane, Flexible, Synthetic Fabrics, ABS Manufacturer Bostik Chemistry Solvent-based, MEK Cure Method Solvent Cure Time (min) Fast drying Viscosity (cPs) High, 8,000 Color White Chemical Resistance Oil Resistant, Water Resistant, Detergents Resistant, Plasticizer Resistant Density (g/cm³) 7.85 (lbs/gallon)
Technical Data for Bostik L4145FR
Cure Time (min) Fast drying Viscosity (cPs) High, 8,000 Test Method
Chemical Resistance Oil Resistant, Water Resistant, Detergents Resistant, Plasticizer Resistant
Flash Point (°F) 21.0 % Solids (%) 38 Density (g/cm³) 7.85 (lbs/gallon)
Shelf Life Details Store between 55 and 100 F, Ship between 45 – 150 F Shelf Life Temperature (°F) 75 Shelf Life (mon) 12
Best Practices for Bostik L4145FR
Surfaces should be clean and dry. Apply sufficient adhesive to each surface and allow to dry. Wipe one surface with MEK and bond with uniform pressure. Alternate method is to apply to one surface and dry at least 20 minutes. Apply to other surface and while still tacky (within 10 minutes) mate two surfaces with firm uniform pressure.
Prior to use, 4145FR should be mixed until homogeneous. The flame retardant will settle upon sitting and hard pack on the bottom of the container. It is critical to the product’s performance that all of the material is redistributed prior to use.
Comparable Materials for Bostik L4145FR
Spec Engine® Results
Closest Results from this Manufacturer
Questions about this material?
Get personal assistance with your specific application needs.