

-
Description for Bostik Liquid Rivet 1152 FS Urethane Adhesive/Sealant
One part, polyurethane, moisture cure, high thixotropy and cured strength. Very high green strength and initial tack.Application Type Bond, Seal 1 Part or 2 Part 1-Part Material Form Liquid Substrate Aluminum, FRP, Plywood, Stainless Steel Industry Vehicle frames Manufacturer Bostik Chemistry Polyurethane, Urethane Cure Method Moisture Cure Temperature (°C) 25 Cure Time (min) 1,440, >20,160 Color Black, White High Temperature Resistance (°C) 190 Low Temperature Resistance (°C) -40 -
Technical Data for Bostik Liquid Rivet 1152 FS Urethane Adhesive/Sealant
Overview
-
1 Part or 2 Part
- 1-Part
-
Material Form
- Liquid
-
Substrate
- Aluminum
- Wood - Plywood
- Composites - FRP
- Stainless Steel
-
Industry
- Other Transportation - Side panels
- Automotive - Vehicle frames
- Industrial - Corner posts, Roof panels, Sandwich panels, Sub-floors, Tubular frame
- Construction - Aluminum roof bows, Composite roof panels, Floor, Walls
-
Chemistry
- Polyurethane - Urethane
-
Cure Method
- Moisture / Condensation Cure - Moisture
-
Color
- Black
- White
Specifications
Cure Specs
Cure Temperature (°C) 25 Test Method Cure Time (min) 1,440, >20,160 Test Method Tack Free Time (min) 30 to 45 Open Time (min) 50 Thixotropic Exremely High Thixotropy Bond Strength
General Bond Strength (psi) Initial Shear Strength (psi) 250, 240, 200, 175 Test Method Green Strength (psi) High Tensile Strength (psi) 300 Test Method Material Resistance
High Temperature Resistance (°C) 190 Low Temperature Resistance (°C) -40 Moisture/Humidity Resistance Moisture/humidity resistance Hardness
Shore A Hardness 55 Test Method Elongation (%) 300 Test Method Flexibility Excellent elastic Modulus (psi) 200 Test Method Other Properties
% Solids (%) Very high solid Business Information
Shelf Life Details Six months from date of manufacture when stored below 80°F (27°C). Shelf Life Temperature (°F) <81 Shelf Life Type From date of manufacture Shelf Life (mon) 6 -
Best Practices for Bostik Liquid Rivet 1152 FS Urethane Adhesive/Sealant
-
Surface Preparation
Substrates should be free of all loose contamination, greases, oils, etc. Use Isopropyl alcohol or other approved solvent for substrate pretreatment.
Temperatures of substrate must be above 40°F.Recommended substrate and product application temperatures are between 55°F and 100°F.
-
Application
Sausage Package—Cut metallic end-clip and place sausage into a pneumatic caulking dispenser. Apply appropriate pressure to install Liquid Rivet 1152 FS so as to assure full contact (surface wetting) to promote sealing and adhesion performance. Tool and finish applied Liquid Rivet 1152 FS immediately to promote best mechanical adhesion and cure appearance. Use water or soapy water solution for tooling compound.
Cartridge—Cut tip to desired shape and diameter. Puncture inner seal before extruding! Apply appropriate pressure to install Liquid Rivet 1152 FS so as to assure full contact (surface wetting) to promote sealing and adhesion performance. Tool and finish applied Liquid Rivet 1152 FS immediately to promote best mechanical adhesion and cure appearance. Use water or soapy water solution for tooling compound.
-
Clean-Up
Uncured Liquid Rivet 1152 FS can be easily removed from hands, tools and substrates using Bostik® Hand & Tool Towels.
-
-
Comparable Materials for Bostik Liquid Rivet 1152 FS Urethane Adhesive/Sealant
Spec Engine® Results
Closest Results from this Manufacturer
Popular Articles
What Are the Differences Between Adhesives and Sealants?
Read ArticleInfographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation
Read ArticleAnaerobic Adhesives
Read ArticleTesting the effectiveness of surface treatments
Read ArticleSponsored Articles
Unique Advantages of Contact Adhesives
Read ArticleUsing LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials
Read ArticleSylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:
Read ArticleCase Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive
Read ArticleFeatured Ads

Cure Temperature Test Methods
Cure Temperature | Cure Time Test Method |
---|---|
25°C | after 14 days cure at 77°F and 50% RH |
Cure Time Test Methods
Cure Time | Test Method |
---|---|
1,440 min | 1/8 in bead |
>20,160 min | after 14 days cure at 77°F and 50% RH |
Tensile Strength Test Methods
Tensile Strength | Cure Time | Cure Temperature | Cure Humidity |
---|---|---|---|
300 psi | >20,160 min | 25°C | 50 % |
Shear Strength Test Methods
Shear Strength | Type | Cure Time | Cure Temperature | Cure Humidity | Substrate | Test Method |
---|---|---|---|---|---|---|
250 psi | Lap shear strength | 20,160 min | 25°C | 50 % | Plywood | 0.062in gap, 1-in overlap, speed 2 inches/min, psi to break |
240 psi | Lap shear strength | 20,160 min | 25°C | 50 % | FRP | 0.062in gap, 1-in overlap, speed 2 inches/min, psi to break |
200 psi | Lap shear strength | 20,160 min | 25°C | 50 % | Painted Aluminum | 0.062in gap, 1-in overlap, speed 2 inches/min, psi to break |
175 psi | Lap shear strength | 20,160 min | 25°C | 50 % | Stainless Steel | 0.062in gap, 1-in overlap, speed 2 inches/min, psi to break |
Elongation Test Methods
Elongation | Test Method |
---|---|
300 % | after 14 days cure at 77°F and 50% RH, at Break |
Modulus Test Methods
Modulus | Temperature | Test Method |
---|---|---|
200 | 25°C | @ 25% Elongation, after 14 days cure at 77°F and 50% RH |
Shore A Hardness Test Methods
Shore A Hardness | Shore Hardness Test Method | Hardness Temperature |
---|---|---|
55 | after 14 days cure at 77°F and 50% RH | 25°C |

1 VIEW FREE
Don't Leave!
View Bostik - Liquid Rivet 1152 FS Urethane Adhesive/Sealant now.