Bostik Simson ISR 70-03 w/ 70-03A

Bostik Simson ISR 70-03 w/ 70-03A Datasheet
  • Description for Bostik Simson ISR 70-03 w/ 70-03A

    High quality adhesive / sealant; high strength; solvent free; neutral cure; very good UV resistance.

    *See Terms of Use Below

    Application Type Bond, Seal
    1 Part or 2 Part 1 Part
    Material Form Paste
    Substrate Copper, Glass, Aluminum, Brass, Powder coated metal, Zinc, Polyester, PVC, Galvanized steel, Stainless Steel, Painted and lacquered wood, Galvanized steel
    Industry Bonding roofs on buses, Bonding polyester on trailers, Bonding roofs on trains, Bonding roofs on trucks, Elastic bonding and sealing for bus construction, Elastic sealing for train construction, Elastic bonding and sealing for truck construction
    Manufacturer Bostik
    Chemistry SMP (Silyl Modified Polymer), PVC-free, Isocyanate-free, Solvent-free
    Cure Method Moisture
    Cure Temperature (°C) 20
    Cure Time (min) Fast, >1,440
    Color Black, Gray, White
    High Temperature Resistance (°C) 120, 180
    Low Temperature Resistance (°C) -40
  • Technical Data for Bostik Simson ISR 70-03 w/ 70-03A

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1 Part or 2 Part - 1 Part
    • Material Form
      • Paste
    • Substrate
    • Industry
      • Bus - Bonding roofs on buses, Elastic bonding and sealing for bus construction
      • Other Transportation - Elastic bonding and sealing for caravan construction, Sunroof assemblies
      • Trailer - Bonding polyester on trailers
      • Rail - Bonding roofs on trains, Elastic sealing for train construction
      • Trucks - Bonding roofs on trucks, Elastic bonding and sealing for truck construction
      • Industrial - Bonding corner profiles of aluminium, Bonding polyester parts on metal frames, Sealing welded seams
      • Construction - Bonding floor systems
    • Chemistry
      • Solvent-Free - PVC-free, Isocyanate-free
      • Silyl Modified Polymer (SMP) / MS Polymer - SMP (Silyl Modified Polymer)
    • Application Method
      • Dispenser - Air-pressure gun
      • Brush - Hand
    • Cure Method
      • Moisture / Condensation Cure - Moisture
    • Color
      • Black
      • Gray
      • White
    Specifications
    Cure Specs
    Application Temperature (°F) 41 to 95
    Cure Temperature (°C) 20 Test Method
    Cure Time (min) Fast, >1,440 Test Method
    Tack Free Time (min) 10 Test Method
    Work / Pot Time (min) <15 Test Method
    Bond Strength
    General Bond Strength (psi) High
    Shear Strength (psi) 360 Test Method
    Green Strength (psi) 300 (Pa) Test Method
    Tensile Strength (psi) 245, 375 Test Method
    Material Resistance
    UV Resistance Excellent, Very Good
    Environmental Resistance Excellent
    High Temperature Resistance (°C) 120, 180
    Low Temperature Resistance (°C) -40
    Moisture/Humidity Resistance Moisture/humidity resistance
    Hardness
    Shore A Hardness 55 Test Method
    Elongation (%) 250 Test Method
    Flexibility Permanently elastic
    Modulus (psi) 475 Test Method
    Other Properties
    Specific Gravity 1.4 (g/ml)
    Business Information
    Shelf Life Details Bostik® 70-03A / Simson ISR 70-03 may be stored for 12 months in closed (unopened) sausages in a dry place at temperatures between 40°F and 90°F (5°C and 30°C).
    Shelf Life Temperature (°F) 41 to 86
    Shelf Life (mon) 12
    Not Good For
    Don't Use With untreated polyethylene, polypropylene, teflon.
  • Best Practices for Bostik Simson ISR 70-03 w/ 70-03A

    *See Terms of Use Below

    1. Surface Preparation

      70-03A adheres well without primer on clean, dry, dust and grease free substrates of aluminum, stainless steel, galvanized steel, zinc, copper, brass, powder coated metal, most lacquered metal surfaces, glass, PVC, polyester (GRP & FRP), painted and lacquered wood, etc. No adhesion on untreated polyethylene, polypropylene and PTFE.

    2. Application

      Simson ISR 70-03 can easily be extruded with a hand- or air-pressure gun at temperatures between 45°F and 100°F (5°C and 35°C). In sealing applications Simson ISR 70-03 should be tooled or smoothened within 10 minutes (at 20°C/50% R.H.) with a spatula or putty knife, occasionally moistened with a soap solution. Avoid soap solution penetrating between joint sides and sealant, which will result in loss of adhesion. In bonding applications, the substrates have to be assembled within 15 minutes (at 20°C/50% R.H.) after applying Simson ISR 70-03. In general an adhesive thickness of 0.062-in. or 1/16-in. (2 mm) is recommended.

    3. Clean-Up

      Cleaning tools or removing uncured residue of Bostik® 70-03A / Simson ISR 70-03 can be done with a clean white/colorless cloth, moistened with IPA (Isopropyl alcohol). Check substrate compatibility with IPA (Isopropyl alcohol) before proceeding.

  • Comparable Materials for Bostik Simson ISR 70-03 w/ 70-03A

    *See Terms of Use Below

    Spec Engine® Results

Questions about this material?

Bostik - Simson ISR 70-03 w/ 70-03A

Get personal assistance with your specific application needs.

Your Profile Edit

Popular Articles

Testing the effectiveness of surface treatments

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Anaerobic Adhesives

Read Article

What Are the Differences Between Adhesives and Sealants?

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

Which answer best describes a project you are currently working on?
Cure Temperature Test Methods
Cure Temperature Cure Time Test Method
20°C Cure speed after 24 hours, 0.125-in. 3 mm, 70°F/20°C @ 50% R.H.
Cure Time Test Methods
Cure Time Test Method
Fast
>1,440 min Cure speed after 24 hours, 0.125-in. 3 mm, 70°F/20°C @ 50% R.H.
Tack Free Time Test Methods
Tack Free Time Tack Free Temperature Test Method
10 min 20°C 70°F/20°C @ 50% R.H.
Work / Pot Time Test Methods
Work / Pot Time Test Method Temperature
<15 min 70°F/20°C @ 50% R.H. 20°C
Shear Strength Test Methods
Shear Strength Substrate Test Method
360 psi Aluminum-to-Aluminum DIN 53283/ASTM D1002, adh. thickness 0.062-in. or 1/16-in. (2mm), test speed 2-in./min. (50 mm/min.)
Tensile Strength Test Methods
Tensile Strength Test Method
245 psi Tensile stress 100%, DIN 53504/ISO 37
375 psi Tensile stress at break, DIN 53504/ISO 37
Green Strength Test Methods
Green Strength Test Method
300 (Pa) Physical Rheometer MC100
Elongation Test Methods
Elongation Test Method
250 % DIN 53504/ISO 37, at Break
Modulus Test Methods
Modulus Test Method
475 psi DIN 53504/ISO 37, E-Modulus (10%)
Shore A Hardness Test Methods
Shore A Hardness Shore Hardness Test Method
55 DIN 53505