Bostik Simson ISR 70-05 Datasheet Bostik Simson ISR 70-05

Information provided by Gluespec
  • Description for Bostik Simson ISR 70-05

    High green strength; high tensile; solvent free; fast curing; paint compatible.

    *See Terms of Use Below

    Application Type Bond, Seal
    1 Part or 2 Part 1-Part
    Material Form Paste
    Substrate Aluminum, Copper, Glass, Metal, Polyester, PVC, Galvanished steel, Painted and lacquered wood, Stainless Steel, Brass, Zinc, Powder coated metal
    Industry Yacht, Roofs on trains, Roofs on buses, Roofs on trucks, Polyester on trailers
    Manufacturer Bostik
    Chemistry Isocyanate-free, SMP (Silyl Modified Polymer), PVC-free, Solvent-free
    Cure Method Moisture
    Application Temperature (°F) 41 to 95
    Cure Temperature (°C) 20
    Cure Time (min) Fast, >1,440
    Color Black, Sky blue, Gray, White
    High Temperature Resistance (°C) 120, 180
    Low Temperature Resistance (°C) -40
  • Technical Data for Bostik Simson ISR 70-05

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1-Part
    • Material Form
      • Paste
    • Substrate
    • Industry
      • Other Transportation - Caravan
      • Marine - Yacht
      • Rail - Roofs on trains
      • Bus - Roofs on buses
      • Trucks - Roofs on trucks
      • Trailer - Polyester on trailers
      • Industrial - Windscreenes
      • Construction - Constuction, Floor systems
    • Chemistry
      • Solvent-Free - PVC-free
      • Other - Isocyanate-free
      • Silyl Modified Polymer (SMP) / MS Polymer - SMP (Silyl Modified Polymer)
    • Application Method
      • Dispenser - Air-pressure gun
      • Brush - Hand
    • Cure Method
      • Moisture / Condensation Cure - Moisture
    • Color
      • Black
      • Blue - Sky blue
      • Gray
      • White
    Specifications
    Cure Specs
    Application Temperature (°F) 41 to 95
    Cure Temperature (°C) 20 Test Method
    Cure Time (min) Fast, >1,440 Test Method
    Tack Free Time (min) 10 Test Method
    Work / Pot Time (min) <15 Test Method
    Bond Strength
    Shear Strength (psi) 435 Test Method
    Green Strength (psi) ca. 500(pa), High Test Method
    Tensile Strength (psi) High, 390, 500 Test Method
    Material Resistance
    UV Resistance Excellent, Very Good
    Environmental Resistance Excellent
    High Temperature Resistance (°C) 120, 180 Test Method
    Low Temperature Resistance (°C) -40
    Moisture/Humidity Resistance Moisture/humidity resistance
    Hardness
    Shore A Hardness 60 Test Method
    Elongation (%) 200 Test Method
    Flexibility Permanently elastic
    Modulus (psi) 700 Test Method
    Other Properties
    Specific Gravity ca. 1.5 (g/ml)
    Business Information
    Shelf Life Details ISR 70-05 may be stored for 12 months in a closed (unopened) container in a dry place at temperatures between +5°C and +30°C (cartridges 18 months)., Simson ISR 70-05 may be stored for 12 months in a closed (unopened) container in a dry place at temperatures between 41°F to 86°F (+5°C and +30°C), (cartridges 18 months).
    Shelf Life Temperature (°F) 41 to 86, 41 to 86
    Shelf Life (mon) 12, 18 Cartridges
    Not Good For
    Don't Use With untreated polyethylene, polypropylene, teflon.
  • Best Practices for Bostik Simson ISR 70-05

    *See Terms of Use Below

    1. Application

      ISR 70-05 can easily be extruded with a hand- or air pressure gun at temperatures between +5°C and +35°C. In sealing applications ISR 70-05 should be tooled or smoothened within 10 minutes (at 20°C/50% R.H.) with a spatula or putty knife, occasionally moistened with a soap solution. Avoid soap solution penetrating between joint sides and sealant, because this will create loss of adhesion.

      Bostik® 70-05A / Simson ISR 70-05 can easily be extruded with a hand- or air pressure gun at temperatures between 41°F to 95°F (+5°C to 35°C). In sealing applications Bostik® 70-05A / Simson ISR 70-05 should be tooled or smoothened within 10 minutes (70°F/20°C @ 50% R.H.) with a spatula or putty knife, occasionally moistened with a soap solution. Avoid soap solution penetrating between joint sides and sealant, because this will create loss of adhesion. In bonding applications, the substrates have to be assembled within 15 minutes (70°F/20°C @ 50% R.H.) after applying Bostik® 70-05A / Simson ISR 70-05. In general an adhesive thickness of 2 mm is recommended.

  • Comparable Materials for Bostik Simson ISR 70-05

    *See Terms of Use Below

    Spec Engine® Results

Popular Articles

What Are the Differences Between Adhesives and Sealants?

Read Article

Testing the effectiveness of surface treatments

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Anaerobic Adhesives

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for Bostik Simson ISR 70-05

Gluespec Poll

Who do you read or follow for engineering news and entertainment?
Cure Temperature Test Methods
Cure Temperature Cure Time Test Method
20°C Cure rate after 24 hours, 0.125 in., ca. 3 mm, 70°F/20°C @ 50% R.H.
Cure Time Test Methods
Cure Time Test Method
Fast
>1,440 min Cure rate after 24 hours, 0.125 in., ca. 3 mm, 70°F/20°C @ 50% R.H.
Tack Free Time Test Methods
Tack Free Time Tack Free Temperature Test Method
10 min 20°C 70°F/20°C @ 50% R.H., ca
Work / Pot Time Test Methods
Work / Pot Time Test Method Temperature
<15 min 70°F/20°C @ 50% R.H. 20°C
Green Strength Test Methods
Green Strength Test Method
ca. 500(pa) Physical Rheometer MC100
High
Tensile Strength Test Methods
Tensile Strength Test Method
High
390 psi Tensile Stress 100%, DIN 53504/ISO 37
500 psi Tensile stress @ Break, DIN 53504/ISO 37
Shear Strength Test Methods
Shear Strength Substrate Test Method
435 psi (Aluminum-to-Aluminum DIN 53283/ASTM D1002, Shear stress, adhesive thickness 2mm, test speed 50 mm/min.
High Temperature Resistance Test Methods
High Temperature Resistance Test Method
120°C
180°C (max.1/2 hr)
Elongation Test Methods
Elongation Test Method
200 % DIN 53504/ISO 37, at Break, Ca.
Modulus Test Methods
Modulus Test Method
700 psi DIN 53504/ISO 37, E-Modulus (10%)
Shore A Hardness Test Methods
Shore A Hardness Shore Hardness Test Method
60 DIN 53505, Ca.