Bostik Simson MSR Fast Tack

Bostik Simson MSR Fast Tack Datasheet
  • Description for Bostik Simson MSR Fast Tack

    High green strength; solventless; UV resistant; good adhesion without primer; fast curing; pintable.

    *See Terms of Use Below

    Application Type Bond, Seal
    1 Part or 2 Part 1 Part
    Material Form Liquid
    Substrate Copper, Glass, Brass, Metal, Zinc, Polyester, PVC, Galvanized steel, Stainless Steel, Lacquered wood, Galvanized steel
    Industry Window, Marine
    Manufacturer Bostik
    Chemistry SMP (Silyl Modified Polymer)
    Cure Method Moisture
    Cure Temperature (°C) 20
    Cure Time (min) Fast, 1,440
    Color Black, White
    High Temperature Resistance (°C) 100
    Low Temperature Resistance (°C) -40
  • Technical Data for Bostik Simson MSR Fast Tack

    • Application Type
    • 1 Part or 2 Part
      • 1 Part or 2 Part - 1 Part
    • Material Form
      • Liquid
    • Substrate
    • Industry
      • Marine
      • Industrial - Portholes, Push Borders, Screens, Sheet, Wall ceiling
      • Construction - Deck fittings, Deck hatches, Deck/Hull connection, Floor
      • Construction Window - Window
    • Chemistry
      • Silyl Modified Polymer (SMP) / MS Polymer - SMP (Silyl Modified Polymer)
    • Application Method
      • Dispenser - Air-pressure mastic gun
      • Brush - Hand
    • Cure Method
      • Moisture / Condensation Cure - Moisture
    • Color
      • Black
      • White
    Cure Specs
    Application Temperature (°F) 41 to 95
    Cure Temperature (°C) 20 Test Method
    Cure Time (min) Fast, 1,440 Test Method
    Open Time Temperature (°C) 20
    Tack Free Time (min) 10, Fast Test Method
    Open Time (min) <15
    Bond Strength
    General Bond Strength (psi) Good
    Shear Strength (psi) ca. 2.3 MPa Test Method
    Green Strength (psi) High, ca. 1700(pa) Test Method
    Tensile Strength (psi) ca. 2.2 MPa, ca. 2.9 MPa Test Method
    Material Resistance
    UV Resistance Excellent, Very Good
    Environmental Resistance Excellent
    High Temperature Resistance (°C) 100
    Low Temperature Resistance (°C) -40
    Shore A Hardness 65 Test Method
    Elongation (%) 225 Test Method
    Flexibility Permanently elastic
    Other Properties
    Specific Gravity ca. 1.4 (g/ml)
    Business Information
    Shelf Life Details MSR Fast Tack can be stored for 18 months in a closed (unopened) container in a dry place at temperatures between +5°C and +30°C. (cartridges 18 months).
    Shelf Life (mon) 18
  • Best Practices for Bostik Simson MSR Fast Tack

    *See Terms of Use Below

    1. Application

      MSR Fast Tack can be extruded easily with a hand- or air-pressure gun between temperatures of 5°C and 35°C.Because of the high green strength clamping can be significantly reduced and in some cases even be completely eliminated. The substrates have to be assembled within 15 minutes (at 20°C/50% R.H.) after the application of MSR Fast Tack. In general, an adhesive thickness of 2 mm is recommended.

    2. Clean-Up

      Remove uncured residues of MSR Fast Tack or cleaning tools can be done with a clean, colourless cloth, wetted with Simson SMP Remover or Simson Cleaner E. It is recommended to make a trial first to check possible harmful effects of these cleaners on the substrate.

  • Comparable Materials for Bostik Simson MSR Fast Tack

    *See Terms of Use Below

    Spec Engine® Results

Questions about this material?

Get personal assistance with your specific application needs.

Your Profile Edit
  1. 1c9e94e2-3cf3-46c9-b054-49024933f89b
  2. 1c9e94e2-3cf3-46c9-b054-49024933f89b

Popular Articles

Testing the effectiveness of surface treatments

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Anaerobic Adhesives

Read Article

What Are the Differences Between Adhesives and Sealants?

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

When you're researching or sourcing materials online, what device are you using?
Cure Temperature Test Methods
Cure Temperature Cure Time Test Method
20°C Curing speed after 24 hrs., ca. 3 mm, 20°C/50%R.H.
Cure Time Test Methods
Cure Time Test Method
1,440 min Curing speed after 24 hrs., ca. 3 mm, 20°C/50%R.H.
Tack Free Time Test Methods
Tack Free Time Tack Free Temperature Test Method
10 min 20°C 20°C/50% R.H.
Shear Strength Test Methods
Shear Strength Substrate Test Method
ca. 2.3 MPa Alu to Alu DIN 53283/ASTM D1002, ca., shear stress, adh. thickness 2mm, test speed 50 mm/min.
Tensile Strength Test Methods
Tensile Strength Test Method
ca. 2.2 MPa Tensile Stress 100%, ca., DIN 53504/ISO 37
ca. 2.9 MPa Tensile stress@ Break, ca., DIN 53504/ISO 37
Green Strength Test Methods
Green Strength Test Method
ca. 1700(pa) Physical Rheometer MC100
Elongation Test Methods
Elongation Test Method
225 % DIN 53504/ISO 37, at Break, ca
Shore A Hardness Test Methods
Shore A Hardness Shore Hardness Test Method
65 DIN 53505, ca.