Application Type Bond 1 Part or 2 Part 1 Part Material Form Aerosol Substrate Fabric, Polyethylene foam, Non-porous, Porous, Fiberglass insulation, Foil, Plastics, Polyethylene foam, Vinyls, Cardboard, Concrete blocks, Latex foam, Metal, Paper, Wood Industry Speakers Manufacturer Bostik Chemistry Polyurethane insulation blocks, Urethane foam Cure Method Solvent Cure Time (min) 15 sec. to several hours Color Translucent High Temperature Resistance (°C) <54 Other Resistance Oxidation
Technical Data for Bostik SuperTak LV ET GP Web Aerosol Adhesive
- Adhesive - Bond
1 Part or 2 Part
- 1 Part or 2 Part - 1 Part
- Polyurethane - Polyurethane insulation blocks, Urethane foam
Cure Time (min) 15 sec. to several hours Tack Free Time (min) Fast Work / Pot Time (min) Longer
UV Resistance Good High Temperature Resistance (°C) <54 Moisture/Humidity Resistance Good Other Resistance Oxidation
% Solids (%) 22 to 23
Shelf Life Details One year from ship date. Extremely Flammable. Keep away from sparks, flame or heat. Please refer to MSDS for complete Shelf Life Type From ship date Shelf Life (mon) 12
Best Practices for Bostik SuperTak LV ET GP Web Aerosol Adhesive
Shake can well before using. Hold can 6 to 8 inches away from the surface to be sprayed. Depress spray tip (with arrow pointed away from the body) and apply a light, uniform coating. To prevent clogging, clear tip after each use by inverting can and spray until nozzle clears. High humidity and heavy coverage of adhesive will slow evaporation rate of solvent. Under these conditions, allow for maximum drying time before joining surfaces. For porous substrates, apply adhesive to both surfaces allowing to dry for 1 minute (no more than 5 minutes) before joining. For non-porous substrates, apply adhesive to both surfaces allowing to dry for 2 minutes (no more than 10 minutes) before joining. For non-permanent (or temporary) bonds, apply a light coat to one surface only, let dry for 6 minutes before joining. Always test production pieces of substrate in typical bonding and operating environment for best application techniques and compatibility. Read precautions on label before using. For best results, apply adhesive at temperatures between 50°F (10°C) and 110°F (43°C).
Comparable Materials for Bostik SuperTak LV ET GP Web Aerosol Adhesive
Spec Engine® Results
Questions about this material?
Get personal assistance with your specific application needs.