Bostik Thermogrip 2103

Bostik Thermogrip 2103 Datasheet
  • Description for Bostik Thermogrip 2103

    Flexible, versatile, medium setting hot melt adhesive; bonds many nonporous substrates including most plastics.

    Note: This material has been discontinued. Please view the Comparable Materials tab or call us at (262) 293-7970 for additional help.

    *See Terms of Use Below

    Application Type Bond
    1 Part or 2 Part 1 Part
    Material Form Stick
    Substrate Non-porous, Plastics
    Industry Food
    Manufacturer Bostik
    Chemistry Hot melt
    Cure Method Hot melt
    Cure Time (min) 1,440
    Viscosity (cPs) 5,500, 2,500
    Color Colorless
    Chemical Resistance Acids & Alkalies, Water
    High Temperature Resistance (°C) 69
    Low Temperature Resistance (°C) -18
    Key Specifications FDA (U.S. Food & Drug Administration) and/or CFIA (Canadian Food Inspection Agency): FDA 21 CFR 175.105
  • Technical Data for Bostik Thermogrip 2103

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1 Part or 2 Part - 1 Part
    • Material Form
      • Stick
    • Substrate
      • Non-Porous Substrates - Non-porous
      • Plastic - Plastics
    • Industry
      • Food & Beverage - Food
    • Chemistry
    • Cure Method
      • Hotmelt - Hot melt
    • Color
      • Clear / Transparent - Colorless
    • Key Specifications
      • FDA (U.S. Food & Drug Administration) and/or CFIA (Canadian Food Inspection Agency): 175.105 - FDA 21 CFR 175.105
    Specifications
    Cure Specs
    Cure Time (min) 1,440
    Viscosity (cPs) 5,500, 2,500 Test Method
    Fixture or Handling Strength Time (min) 60
    Set Time (min) Medium
    Softening Point (°C) 93
    Work / Pot Time (min) Medium to Long
    Bond Strength
    Tensile Strength (psi) 300 Test Method
    Material Resistance
    Chemical Resistance Acids & Alkalies, Water
    High Temperature Resistance (°C) 69
    Low Temperature Resistance (°C) -18
    Hardness
    Elongation (%) 850 Test Method
    Flexibility Flexible
    Other Properties
    Specific Gravity 0.94 (gm/cc) Test Method
    Business Information
    Shelf Life Details Shelf Life: 999 days @ 73.4°F (23°C);Shipping and storage,: Between 40°F to 95°F (4°C to 35°C)
    Shelf Life Temperature (°F) 73
    Shelf Life (mon) 33
  • Best Practices for Bostik Thermogrip 2103

    *See Terms of Use Below

    1. Surface Preparation

      All surfaces should be clean and free of contaminants. If necessary, clean surfaces with solvent.

    2. Application

      Apply the adhesive to the more difficult-to-bond surface. In general, hard, smooth surfaces are more difficult to bond than rough, porous surfaces. “Open-time” varies depending on application temperature, amount of adhesive applied, type of substrate and ambient temperature conditions. Mate the surfaces to be bonded as quickly as possible after adhesive has been applied for optimum bond strength. Use firmest pressure practical for object being bonded. Do not move or adjust surfaces after contact has been made, as inferior bond strength will result. Typically, a properly formed hot melt adhesive bond will achieve 50% of its strength after 1 minute, 75% after 1 hour, and 100% after 1 day.

  • Comparable Materials for Bostik Thermogrip 2103

    *See Terms of Use Below

    Spec Engine® Results

Questions about this material?

Get personal assistance with your specific application needs.

Your Profile Edit
  1. 7fa522ff-1219-4833-8fe2-8371c3ecd80a
  2. 7fa522ff-1219-4833-8fe2-8371c3ecd80a

Popular Articles

What to know about Hot Melt Adhesives

Read Article

Testing the effectiveness of surface treatments

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Hot Melt Adhesives in the Textile Industry

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

Which answer best describes a project you are currently working on?
Viscosity Test Methods
Viscosity Temperature
5,500 cPs 177°C
2,500 cPs 205°C
Tensile Strength Test Methods
Tensile Strength Cure Time
300 psi 1,440 min
Elongation Test Methods
Elongation Test Method
850 % After 24 Hour Cure
Specific Gravity Test Methods
Specific Gravity Test Method
0.94 (gm/cc) After 24 Hour Cure