Bostik Thermogrip 2105 Datasheet Bostik Thermogrip 2105

CONTACT REP
Information provided by Gluespec

  • Description for Bostik Thermogrip 2105

    Fast setting, low viscosity hot melt with good flexibility, runs well in most consumer and industrial glue guns.

    Note: This material has been discontinued. Please view the Comparable Materials tab or call us at (262) 293-7970 for additional help.

    *See Terms of Use Below

    Chemical Resistance Alkalies, Chemical Resistance: Acids, Chemical Resistance: Fluid Resistance: Water
    Application Type Bond
    1 Part or 2 Part 1-Part
    Material Form Stick
    Substrate Porous substrates
    Industry Food
    Manufacturer Bostik
    Chemistry Hot melt
    Cure Method Hot melt
    Cure Time (min) 1,440
    Viscosity (cPs) Low, 2,025
    Color Straw
    High Temperature Resistance (°C) 66
    Low Temperature Resistance (°C) -23
    Key Specifications FDA (U.S. Food & Drug Administration) and/or CFIA (Canadian Food Inspection Agency): FDA 21 CFR 175.105

  • Technical Data for Bostik Thermogrip 2105

    *See Terms of Use Below

    Overview
    • Chemical Resistance
      • Chemical Resistance : Fluid Resistance : Water Resistance - Water
      • Chemical Resistance - Alkalies
      • Chemical Resistance : Acid Resistance - Acids
    • Application Type
    • 1 Part or 2 Part
      • 1-Part
    • Material Form
      • Stick
    • Substrate
      • Porous Substrates
    • Industry
    • Chemistry
    • Cure Method
      • Hotmelt - Hot melt
    • Color
      • Yellow - Straw
    • Key Specifications
      • FDA (U.S. Food & Drug Administration) and/or CFIA (Canadian Food Inspection Agency) : 175.105 - FDA 21 CFR 175.105
    Specifications
    Cure Specs
    Cure Time (min) 1,440
    Viscosity (cPs) Low, 2,025 Test Method
    Fixture or Handling Strength Time (min) 60
    Set Time (min) Fast
    Softening Point (°C) 96
    Work / Pot Time (min) Short, 0.08 to 0.25
    Bond Strength
    Tensile Strength (psi) 350 Test Method
    Material Resistance
    High Temperature Resistance (°C) 66
    Low Temperature Resistance (°C) -23
    Hardness
    Elongation (%) 100 Test Method
    Flexibility Good
    Other Properties
    Specific Gravity 0.95 (gm/cc) Test Method
    Business Information
    Shelf Life Details 999 days @ 73.4°F (23°C).;Shipping and storage: Between 40°F to 95°F (4°C to 35°C)
    Shelf Life Temperature (°F) 73
    Shelf Life (mon) 33

  • Best Practices for Bostik Thermogrip 2105

    *See Terms of Use Below

    1. Surface Preparation

      All surfaces should be clean and free of contaminants. If necessary, clean surfaces with solvent.

    2. Application

      Apply the adhesive to the more difficult-to-bond surface. In general, hard, smooth surfaces are more difficult to bond than rough, porous surfaces. “Open-time” varies depending on application temperature, amount of adhesive applied, type of substrate and ambient temperature conditions. Mate the surfaces to be bonded as quickly as possible after adhesive has been applied for optimum bond strength. Use firmest pressure practical for object being bonded. Do not move or adjust surfaces after contact has been made, as inferior bond strength will result. Typically, a properly formed hot melt adhesive bond will achieve 50% of its strength after 1 minute, 75% after 1 hour, and 100% after 1 day.

  • Comparable Materials for Bostik Thermogrip 2105

    *See Terms of Use Below

    Spec Engine® Results

    • Bostik
      Thermogrip 2124(Bostik)

      Flexible hot melt adhesive, long set time, designed for high performance bonding of difficult substrates or substrate combinations.

    • Bostik
      Thermogrip 2109(Bostik)

      Medium-setting hot melt adhesive, economical with low viscosity and quick grab ability very good "gunability" in stick form.

    • Bostik
      Thermogrip 2107(Bostik)

      Tough, medium setting, versatile hot melt adhesive, good "idling" performance in most glue guns, low odor.

    • Compare All
  Download Technical Data Sheet   Save This Material   Compare View Saved Items

Popular Articles

What to know about Hot Melt Adhesives

Read Article

Hot Melt Adhesives in the Textile Industry

Read Article

Testing the effectiveness of surface treatments

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for Bostik Thermogrip 2105

All Bostik Materials
View Now

Gluespec Poll

Who do you read or follow for engineering news and entertainment?
Viscosity Test Methods
Viscosity Temperature
Low
2,025 cPs 177°C
Tensile Strength Test Methods
Tensile Strength Cure Time
350 psi 1,440 min
Elongation Test Methods
Elongation Test Method
100 % After 24 Hour Cure
Specific Gravity Test Methods
Specific Gravity Test Method
0.95 (gm/cc) After 24 Hour Cure