Bostik Ultimate Adhesive Remover
Application Type Adhesive, Remover, Cleaning Compound 1 Part or 2 Part 1-Part Material Form Liquid Substrate Wood Manufacturer Bostik Chemistry Biodegradeable Odor Details Low odor Color Light yellow Can Be Used In Conjunction With These Materials Urethanes
Technical Data for Bostik Ultimate Adhesive Remover
- Cleaner – For Uncured Materials - Cleaning Compound
- Cleaner/Debonder/Remover – For Cured Materials - Remover
1 Part or 2 Part
- Construction - Flooring
- Other - Biodegradeable
- Brush - Dry, clean, non-abrasive cloth, Pre-Soaked towels
- Yellow - Light yellow
Can Be Used In Conjunction With These Materials
Odor Details Low odor
Flash Point (°F) 205.0
Shelf Life Details Store Ultimate Adhesive Remover in a clean, dry area. Shelf life is one year from date of manufacturing. Shelf Life Type From date of manufacturing Shelf Life (mon) 12
Not Good For
Don't Use With floor boards.
Best Practices for Bostik Ultimate Adhesive Remover
APPLICATION (LIQUID FORMULATION): Apply remover to a dry, clean, non-abrasive cloth.
Using the dampened cloth, wipe area of the floor that has cured or wet adhesive.
APPLICATION (PRE-SOAKED TOWELS): Open lid and pull out towels.
Rub area of the floor that has cured or wet adhesive using a presoaked towel.
If adhesive has cured for more than two days, apply a small amount of Ultimate Urethane Remover directly on the adhesive and let it stand approximately 5 minutes.
If adhesive has cured for more than two days, lay a towel over cured adhesive and let it stand for approximately 5 minutes.
Wipe area clean with a dry cloth.
Wipe area clean with a fresh towel.
Comparable Materials for Bostik Ultimate Adhesive Remover
Spec Engine® Results