Application Type Bond 1 Part or 2 Part 1 Part Substrate Fabric, Urethane foam, Some supported vinyls, Metal, Paper, Wood, Foam, Urethane foam Industry Fabric to speakers, General upholstery Manufacturer Camie Campbell Chemistry Synthetic resin(s), Styrene butadiene copolymer, Hexane (Aliphatic Hydrocarbon), Acetone (Ketone) Cure Method Solvent Color Red, Light amber High Temperature Resistance (°C) Heat resistance, <54 Other Resistance Oxidation resistance
Technical Data for Camie Campbell 323B
- Adhesive - Bond
1 Part or 2 Part
- 1 Part or 2 Part - 1 Part
- Other - Synthetic resin(s), Styrene butadiene copolymer, Hexane (Aliphatic Hydrocarbon), Acetone (Ketone)
- Dispenser - 118 SPRAY GUN, Conventional air-operated equipment.
- Red - Light amber
Work / Pot Time (min) 0.25 to 5.00
High Temperature Resistance (°C) Heat resistance, <54 Moisture/Humidity Resistance Good moisture resistance Other Resistance Oxidation resistance
% Solids (%) 19 to 22
Shelf Life Details Six months from date of shipment in a properly sealed container. Shelf Life Type From date of shipment Shelf Life (mon) 6
Best Practices for Camie Campbell 323B
Hold spray gun at least 6 to 8 inches away from surfaces to be sprayed. Apply a uniform coating. It is recommended when bonding foam-to-foam or fabric-to-foam (spray both surfaces to obtain optimum bond strength). Use for general upholstery, foam bonding, forming foam shapes by knife edge bonding, fabric to speakers, office partitions, metal and wood, etc. Read precautions on label before using.
Comparable Materials for Camie Campbell 323B
Spec Engine® Results
Questions about this material?
Get personal assistance with your specific application needs.