Camie Campbell 333N SPRAY

Spec Engine^® Results

• 

  Dowsil 3140 RTV Coating(Dow)

  One-part, translucent adhesive or coating with good flowability, good flame resistance, UL, IPC and Mil spec tested.

• 

  984-T(Dymax)

  A single component, 100% solids conformal coating specifically formulated for rapid room temperature cure when exposed to long-wave (320-380 nanometer) UV light.

• 

  WB0802(HB Fuller)

  Water-based adhesive that contains no solvent. UL-approved, spray-grade adhesive. Sets rapidly & has high wet tack. Designed for factory bonding of thermal insulation up to 3 lbs/cu. ft density, fabrics, felts & paper to painted or unpainted metal, fabric, board or wood. Light in color for applications where appearance is a concern. Produces a flexible, water-resistant, long-lasting, odor-free bond.

• Compare All

Closest Results from this Manufacturer

• 

  390B Contact Cement and Trim Adhesive(Camie Campbell)

  A high strength, bulk packaged, adhesive available in both red or clear, can be applied where high temperature or high strength bonding is required. Does not contain chlorofluorocarbons or ozone depleting chemicals.

• 

  393 Trim and Laminating Adhesive(Camie Campbell)

  Recommended for all applications requiring either high strength or high temperature, or both. Clear and non-yellowing, use it on trim work, door panels, or other difficult applications. The adhesive has a 3-way adjustable valve for a webbing-type spray pattern. Water resistant. Does not contain chlorofluorocarbons or ozone depleting chemicals.

• 

  375 Screen Printers Flash Cure Adhesive(Camie Campbell)

  Designed for the textile screen printer who is using a flash curing technique on the ink. Holds most textile products including fleece garments. The clear, mist-type spray is particularly suited for the rapid heat cycles encountered in the flash cure process. Product does not contain chlorinated solvents. Does not contain chlorofluorocarbons or ozone depleting chemicals.

• Compare All