Application Type Bond 1 Part or 2 Part 1 Part Material Form Aerosol Substrate Fabric, Foil, Paper, Cardboard, Concrete, Porous, Polyethylene Manufacturer Camie Campbell Chemistry Aliphatic (Hexane), Styrene butadiene copolymer, Ketone (Acetone), Urethane foam, Synthetic resin(s), C12-C14 Isoalkanes Cure Method Solvent Color Water White, Water White High Temperature Resistance (°C) <49
Technical Data for Camie Campbell 363 High Strength Fast Tack Spray Adhesive
Tack Free Time (min) Fast Work / Pot Time (min) 0.17 to 2.00, 15 seconds to several hours
General Bond Strength (psi) High
High Temperature Resistance (°C) <49
% Solids (%) 18 to 22
Shelf Life Type from date of shipment Shelf Life (mon) 12
Best Practices for Camie Campbell 363 High Strength Fast Tack Spray Adhesive
Invert can and spray to clear spray tip. Hold can 6 to 8 inches away from surface to be sprayed, depress spray tip (with arrow pointed away from body) and apply a uniform coating. For porous substrates, applying two coats in the opposite direction of each other will increase bond strength. For PERMANENT bonding applications apply a heavy coat to both surfaces. For TEMPORARY bonds apply a light coat to one surface only and bond. Read precautions on label before using. For best results apply adhesive at temperatures of between 50 F and 110 F.
Comparable Materials for Camie Campbell 363 High Strength Fast Tack Spray Adhesive
Spec Engine® Results
Questions about this material?
Get personal assistance with your specific application needs.