Application Type Bond 1 Part or 2 Part 1 Part Material Form Liquid Manufacturer Camie Campbell Chemistry Hexane (Aliphatic), Styrene butadiene copolymer, Synthetic resin(s), Acetone Blend Cure Method Pressure-sensitive Color Water White, Water White Chemical Resistance Good High Temperature Resistance (°C) <43 Other Resistance Physical
Technical Data for Camie Campbell 380 Screen Printers Adhesive
- Adhesive - Bond
1 Part or 2 Part
- 1 Part or 2 Part - 1 Part
- Spray - Mist
- Screen Print
- Pressure Sensitive (min) - Pressure-sensitive
- Clear / Transparent - Water White
- White - Water White
Work / Pot Time (min) 15 Seconds to several hours
Chemical Resistance Good High Temperature Resistance (°C) <43 Moisture/Humidity Resistance Good Other Resistance Physical
% Solids (%) 18 to 22
Shelf Life Type From date of shipment Shelf Life (mon) 12
Not Good For
Don't Use With Vinyl
Best Practices for Camie Campbell 380 Screen Printers Adhesive
Invert can and spray to clear spray tip. Shake well before using.
Hold can 6 to 8 inches away from surfaces to be sprayed. Press spray tip (with arrow pointed away from body) and apply a uniform coating. Apply the adhesive to only one surface for repositionable bond and let dry for 20 seconds to one minute, then press into position.
For a stronger and more permanent bond, apply the adhesive and let dry for a few seconds until tacky, then press into place.
A double coat is recommended with the second coat being applied in the opposite direction of the first, for a much more permanent bond.
Read precautions on label before using.
For best results apply adhesive at temperatures of between 50 F and 110 F.
Comparable Materials for Camie Campbell 380 Screen Printers Adhesive
Spec Engine® Results
Questions about this material?
Get personal assistance with your specific application needs.