Camie Campbell 390B Contact Cement and Trim Adhesive

Camie Campbell 390B Contact Cement and Trim Adhesive Datasheet
  • Description for Camie Campbell 390B Contact Cement and Trim Adhesive

    A high strength, bulk packaged, adhesive available in both red or clear, can be applied where high temperature or high strength bonding is required. Does not contain chlorofluorocarbons or ozone depleting chemicals.

    *See Terms of Use Below

    Application Type Bond
    1 Part or 2 Part 1 Part
    Material Form Liquid, Elastomeric contact
    Substrate Foam, Metal, Plastic laminates, Vinyl, Wood
    Industry Door trim, Upholstery
    Manufacturer Camie Campbell
    Chemistry Aliphatic (Hexane), Aromatic (Toluene), Elastomeric contact, Ketone (Acetone and Methyl-Ethyl-Ketone), Polychloroprene rubber, Synthetic resin(s)
    Cure Method Solvent
    Viscosity (cPs) 100 to 200
    Color Natural, Amber, Red
    Chemical Resistance Degradation by oxidation, Detergents, Good, Oils, Water
    High Temperature Resistance (°C) <93
    Other Resistance Physical
    Density (g/cm³) 6.9 to 7.1 (lbs/gal)
  • Technical Data for Camie Campbell 390B Contact Cement and Trim Adhesive

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1 Part or 2 Part - 1 Part
    • Material Form
      • Elastomer - Elastomeric contact
      • Liquid
    • Substrate
      • Foam
      • Metal
      • Plastic - Plastic laminates
      • Vinyl
      • Wood
      • Other - Cloth, Coated finishes, Laminates
    • Industry
      • Other Transportation - Van conversion
      • Upholstery
      • Construction - Carpet
      • Construction Door - Door trim
    • Chemistry
      • Aliphatic (Hexane)
      • Other - Aromatic (Toluene), Elastomeric contact, Ketone (Acetone and Methyl-Ethyl-Ketone), Polychloroprene rubber, Synthetic resin(s)
    • Application Method
      • Brush
      • Spray
    • Cure Method
      • Solvent
    • Color
      • Red - Amber
      • Other - Natural
    Specifications
    Cure Specs
    Viscosity (cPs) 100 to 200 Test Method
    Work / Pot Time (min) 5.00 to 30
    Bond Strength
    General Bond Strength (psi) High
    Material Resistance
    Chemical Resistance Degradation by oxidation, Detergents, Good, Oils, Water
    High Temperature Resistance (°C) <93
    Other Resistance Physical
    Other Properties
    Density (g/cm³) 6.9 to 7.1 (lbs/gal)
    Business Information
    Shelf Life Details Six months from date of shipment in a properly sealed container.
    Shelf Life Type From date of shipment
    Shelf Life (mon) 6
  • Best Practices for Camie Campbell 390B Contact Cement and Trim Adhesive

    *See Terms of Use Below

    1. Surface Preparation

      Surfaces to be bonded must be clean of dirt, oil and mold release.

    2. Application

      Before using Camie 390B, surfaces to be bonded must be clean of dirt, oil and mold release. Then spray both surfaces and when the adhesive feels dry to the touch adhere to the substrates. Read precautions on label before using. For best results apply adhesive at temperatures of between 50F and 100F.

  • Comparable Materials for Camie Campbell 390B Contact Cement and Trim Adhesive

    *See Terms of Use Below

    Spec Engine® Results

    Closest Results from this Manufacturer

Questions about this material?

Get personal assistance with your specific application needs.

Your Profile Edit
  1. a4f61902-50ca-46fa-99fa-e4fcac1b3770
  2. a4f61902-50ca-46fa-99fa-e4fcac1b3770

Popular Articles

Testing the effectiveness of surface treatments

Read Article

Lightweighting drives automotive adhesives demand

Read Article

6 objects held together by adhesives you probably can't live without

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

Which answer best describes a project you are currently working on?
Viscosity Test Methods
Viscosity Test Method
100 to 200 cPs Brookfield #1-10-75