Dow Contractors Concrete Sealant Datasheet Dow Contractors Concrete Sealant

Information provided by Gluespec
  • Description for Dow Contractors Concrete Sealant

    Excellent weatherproofing performance, adhesion to concrete and masonry; low VOC content; extension compression capability of -50/+50%.

    *See Terms of Use Below

    Application Type Bond, Seal
    1 Part or 2 Part 1-Part
    Material Form Liquid
    Manufacturer Dow
    Chemistry Silicone
    Cure Method Moisture
    Cure Temperature (°C) 25, 25
    Cure Time (min) 180 to 360, 10,080 to 20,160
    High Temperature Resistance (°C) 121
    Low Temperature Resistance (°C) -40
  • Technical Data for Dow Contractors Concrete Sealant

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1-Part
    • Material Form
      • Liquid
    • Chemistry
    • Cure Method
      • Moisture / Condensation Cure - Moisture
    Specifications
    Cure Specs
    Cure Temperature (°C) 25, 25 Test Method
    Cure Time (min) 180 to 360, 10,080 to 20,160 Test Method
    Material Resistance
    High Temperature Resistance (°C) 121
    Low Temperature Resistance (°C) -40
    Hardness
    Shore A Hardness 15
    Elongation (%) 16
  • Best Practices for Dow Contractors Concrete Sealant

    *See Terms of Use Below

  • Comparable Materials for Dow Contractors Concrete Sealant

    *See Terms of Use Below

    Spec Engine® Results

Popular Articles

Testing the effectiveness of surface treatments

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Silicones in LED Lighting | Gluespec

Read Article

What Are the Differences Between Adhesives and Sealants?

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Gluespec Poll

What level of expertise do you have in specialty chemicals like adhesives, sealants, conformal coatings, etc.?
Cure Temperature Test Methods
Cure Temperature Cure Time Test Method
25°C Cure rate at 77°F and 50% RH, Initial skinning
25°C Cure rate at 77°F and 50% RH, Through cure (3/8" [9 mm] depth)
Cure Time Test Methods
Cure Time Test Method
180 to 360 min Cure rate at 77°F and 50% RH, Initial skinning
10,080 to 20,160 min Cure rate at 77°F and 50% RH, Through cure (3/8" [9 mm] depth)