Elantas (Altana) AD-1040B

Elantas (Altana) AD-1040B Datasheet
CONTACT REP

  • Description for Elantas (Altana) AD-1040B

    A general purpose, thixotropic, 100% solids, epoxy paste adhesive. It has been formulated to provide a superior bond to concrete, granite, marble, plastic, and all aggregate substrates.

    *See Terms of Use Below

    Brand Cytec
    Application Type Bond
    1 Part or 2 Part 2 Part
    Material Form Paste
    Substrate metal, plastic, Concrete
    Industry General purpose
    Manufacturer Elantas (Altana)
    Chemistry Epoxy
    Application Method spatula
    Cure Method Solvent
    Cure Temperature (°C) 16 to 29, 60, Lower temperature
    Cure Time (min) 1,440, 120, 4,320
    Color Grey
    High Temperature Resistance (°C) 79, Good thermal resistance
    Low Temperature Resistance (°C) -46
    Other Resistance Good mechanical shock resistance

  • Technical Data for Elantas (Altana) AD-1040B

    *See Terms of Use Below

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1 Part or 2 Part - 2 Part
    • Material Form
      • Paste
    • Substrate
    • Industry
      • General Purpose
    • Chemistry
    • Application Method
      • Brush - stiff brush
      • Spatula/Trowel - spatula
    • Cure Method
      • Solvent
    • Color
      • Gray - Grey
    • Brand
      • Cytec
    Specifications
    Cure Specs
    Cure Temperature (°C) 16 to 29, 60, Lower temperature
    Cure Time (min) 1,440, 120, 4,320
    Linear Shrinkage (%) 0.80
    Thixotropic Thixotropic
    Mix Ratio 1:1 (by volume)
    Bond Strength
    Tensile Strength (psi) 2,500
    Material Resistance
    High Temperature Resistance (°C) 79, Good thermal resistance
    Low Temperature Resistance (°C) -46
    Other Resistance Good mechanical shock resistance
    Hardness
    Flexibility Good
    Other Properties
    % Solids (%) 100
    Business Information
    Shelf Life Details CONAPOXY® AD-1040B is storage stable for 6 months in the original unopened container when stored at temperatures of 70°-85°F.
    Shelf Life Temperature (°F) 158 to 185
    Shelf Life (mon) 6

  • Best Practices for Elantas (Altana) AD-1040B

    *See Terms of Use Below

    1. Surface Preparation

      Apply to clean, dry, oil-free surface. If bonding to metal, rough abrade the surface with sandpaper and wipe with a solvent such as acetone.

    2. Application

      Apply by spatula or stiff brush, using light pressure to insure that the surface is properly “wet” by the adhesive.

      Where possible, apply to each mating surface.

      Contact pressure only is required.

    3. Mixing

      Mix (by volume) one equal portion of AD-1040B base compound with one equal portion of EA-073 hardener. The base is colored black, and the hardener colored cream. Mix until the color is a uniform gray color.

      Use dixie cups, spoons, or equal spatula loads for measuring. Proportions should be nearly (visually) equal as possible.

      Use a separate utensil for removing material from each container. Immediately replace the lids on proper containers after use.

      Immediately clean mixing tools that are reclaimable after use.

  • Comparable Materials for Elantas (Altana) AD-1040B

    *See Terms of Use Below

    Spec Engine® Results

    • Henkel
      Eccocoat EC 210 A/B(Henkel)

      A general purpose, solvent containing, oxide filled, epoxy surface coating. It has outstanding resistance to moisture, chemical attack, and weathering.

    • Henkel
      Loctite CT 5030 E&C(Henkel)

      A two component, silver filled, heat cured, solvent based, electrically conductive epoxy ink and coating.

    • Henkel
      TF 3056(Henkel)

      A two-component, low-density potting compound. Although it is epoxy chemistry, clean up is with hot, soapy water rather than solvents.

    • Compare All

    Closest Results from this Manufacturer

    • Elantas (Altana)
      EA-073A(Elantas (Altana))

      A general purpose, thixotropic, 100% solids, epoxy paste adhesive. It has been formulated to provide a superior bond to concrete, granite, marble, plastic, and all aggregate substrates.

    • Compare All
  Download Technical Data Sheet   Save This Material Saved Items

Questions about this material?

Get personal assistance with your specific application needs.

Your Profile Edit
  1. 4efa822a-b401-4147-a26b-1b2023335600
  2. 4efa822a-b401-4147-a26b-1b2023335600
Submit

Popular Articles

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Epoxies in the Medical Device Industry

Read Article

Electrically Conductive Adhesives

Read Article

Testing the effectiveness of surface treatments

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

Who do you read or follow for engineering news and entertainment?