Brand Cytec Application Type Bond, Primer 1 Part or 2 Part 1 Part Material Form Liquid Substrate aluminum alloys, magnesium, Iron, Glass, Steel, Wood, glass-fiber laminates Manufacturer Elantas (Altana) Chemistry Solvent-Based Cure Method Solvent Viscosity (cPs) 160 Color Amber Other Resistance Excellent hydrolysis resistance Can Be Used In Conjunction With These Materials Urethanes
Technical Data for Elantas (Altana) AD-1146-C
1 Part or 2 Part
- 1 Part or 2 Part - 1 Part
- Roll - roller-coating
- Brush - Soft brush
- Other - Doctor-blade
- Red - Amber
Can Be Used In Conjunction With These Materials
Viscosity (cPs) 160 Test Method
Environmental Resistance Excellent environmental extremes resistance Other Resistance Excellent hydrolysis resistance
Specific Gravity 0.860 Test Method % Solids (%) 14
Shelf Life Type From date of manufacture Shelf Life (mon) 15
Best Practices for Elantas (Altana) AD-1146-C
High strength bonds can only be obtained if all surfaces to be bonded are free of dirt, rust, chemicals, and mold releases. In addition, surfaces to be bonded should be sandblasted, etched, or degreased.
Apply one or two coats of CONAP AD-1146 or CONAP AD-1147 (two coats are required for CONAP AD-1146-C and CONAP AD-1147-C) with a soft brush, allowing the adhesive to flow on the surface. Application may also be accomplished by spraying, roller-coating, or by doctor-blade. Air dry ½ hour between coats and one hour or longer after the final coat. Prior to the application of urethane, activate the primer by baking at 180ºF-200ºF for 1-2 hours.
NOTE: For optimum results, primer film thickness should be 0.0005 inches to 0.0015 inches. Under no circumstances should film thickness be less than 0.0005 inches.
Air dry ½ hour between coats and one-hour or longer after the final coat.
When bonding urethanes to metals, the drying period can be part of the preheat cycle used to bring the mold and part to the desired curing temperature. Preheat temperatures of 90-100°C (194-212°F) for 2 to 3 hours are not detrimental. The adhesion of the urethane to the primer film is excellent, and the adhesion of the primer to the metal is improved.
Comparable Materials for Elantas (Altana) AD-1146-C
Spec Engine® Results
Closest Results from this Manufacturer
Questions about this material?
Get personal assistance with your specific application needs.