

-
Description for Elantas (Altana) Conap AD-1161
A solvent-borne primer for bonding liquid polyurethanes to polyvinylchloride (PVC) substrates during the curing process.Brand Cytec, Conap Application Type Bonding, Primer 1 Part or 2 Part 1-Part Material Form Liquid Substrate Polyurethanes, Polyvinylchloride (PVC) Manufacturer Elantas (Altana) Chemistry Methyl ethyl ketone (MEK), Solvent-borne Cure Method Air dry Cure Temperature (°C) 110 Cure Time (min) 60 Viscosity (cPs) 80 Color Light amber Other Resistance Excellent resistance to hydrolysis Key Specifications Complies with Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 (RoHS 2.0), Meets the requirements of MIL-P-46067A, Mil-Spec (United States Military Standard): QPL listed – MIL-M-24041 Category B, Type I, Mil-Spec (United States Military Standard): Meet the requirements of MIL-P-46076A, MSFC (MARSHALL SPACE FLIGHT CENTER) : Meets the requirements of MSFC-SPEC-292A -
Technical Data for Elantas (Altana) Conap AD-1161
Overview
-
1 Part or 2 Part
- 1-Part
-
Material Form
- Liquid
-
Substrate
- Polyurethane - Polyurethanes
- Polyvinyl chloride (PVC) - Polyvinylchloride (PVC)
-
Chemistry
- Solvent-Based - Methyl ethyl ketone (MEK), Solvent-borne
-
Application Method
- Roll - Roller
- Brush
- Spray
-
Cure Method
- Room Temperature / Air Dry - Air dry
-
Color
- Red - Light amber
-
Key Specifications
- RoHS (Restriction of Hazardous Substances) - Complies with Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 (RoHS 2.0)
- Mil-Spec (United States Military Standard) - Meets the requirements of MIL-P-46067A
- Mil-Spec (United States Military Standard) : 24041 - QPL listed – MIL-M-24041 Category B, Type I
- Mil-Spec (United States Military Standard) : P-46076A - Meet the requirements of MIL-P-46076A
- MSFC (MARSHALL SPACE FLIGHT CENTER) : MSFC-SPEC-292A - Meets the requirements of MSFC-SPEC-292A
-
Brand
- Conap
- Cytec
Specifications
Cure Specs
Cure Temperature (°C) 110 Test Method Cure Time (min) 60 Test Method Viscosity (cPs) 80 Test Method Dry Time (min) 30 Bond Strength
Peel Strength (piw) 30 (pounds per inch width) Material Resistance
Environmental Resistance Excellent resistance to environmental extremes Other Resistance Excellent resistance to hydrolysis Other Properties
Specific Gravity 0.881 Test Method Flash Point (°F) 15.8 Test Method % Solids (%) 20 Test Method Business Information
Shelf Life Details AD-1161 should be stored at temperatures below 80°F., Store at or below 25°C / 77°F in a dry controlled environment out of direct sunlight. This material should be suitable for use stored under these conditions in the original sealed containers for twelve (12) months from the date of shipment. Shelf Life Temperature (°F) <80 (F), 77 Shelf Life Type From date of manufacture, From the date of shipment Shelf Life (mon) 15, 12 -
Best Practices for Elantas (Altana) Conap AD-1161
-
Surface Preparation
The PVC surface should be dry, free of dirt, grease, oil and mold release agents.
Prepare the PVC surface by treating it with MEK solvent until tacky.
-
Application
Apply a thin, uniform coat of CONAP® AD-1161 Adhesive Primer to the tackified surface.
Apply polyurethane resin and cure as recommended.
-
Curing
Allow the primer to air dry for 30 minutes at room temperature.
-
-
Comparable Materials for Elantas (Altana) Conap AD-1161
Spec Engine® Results
Popular Articles
Testing the effectiveness of surface treatments
Read ArticlePrimers and Surface Preparation for Proper Adhesive Wetting & Bonding - Q&A
Read ArticleInfographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation
Read ArticlePlastic Bonding with Adhesives - Considerations Q&A
Read ArticleSponsored Articles
Unique Advantages of Contact Adhesives
Read ArticleUsing LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials
Read ArticleSylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:
Read ArticleCase Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive
Read ArticleFeatured Ads

Cure Temperature Test Methods
Cure Temperature | Cure Time Test Method |
---|---|
110°C | 0.5 grams |
Cure Time Test Methods
Cure Time | Test Method |
---|---|
60 min | 0.5 grams |
Viscosity Test Methods
Viscosity | Test Method | Temperature |
---|---|---|
80 cPs | As Supplied | 25°C |
Flash Point Test Methods
Flash Point | Test Method |
---|---|
15.8°F | ASTM D93, As Supplied |
% Solids Test Methods
% Solids | Test Method |
---|---|
20 % | As Supplied |
Specific Gravity Test Methods
Specific Gravity | Temperature |
---|---|
0.881 | 25°C |