Elantas (Altana) Conathane EN-2541 Datasheet Elantas (Altana) Conathane EN-2541

Information provided by Gluespec
  • Description for Elantas (Altana) Conathane EN-2541

    A filled, flame resistant polyurethane resin that when tested in accordance with UL-94, flame resistance ratings of 94V-O are obtained. Cure at room or elevated temperatures.

    *See Terms of Use Below

    Brand Conathane, Cytec
    Application Type Adhesive
    1 Part or 2 Part 2-Part
    Material Form Liquid
    Industry Electrical/electronic potting, Electrical/electronic Casting, Electrical/electronic Encapsulant
    Manufacturer Elantas (Altana)
    Chemistry Non-MBOCA, Polyurethane
    Cure Method Part A/Part B
    Cure Temperature (°C) 25, 60
    Cure Time (min) 7,200 to 10,080, 360
    Viscosity (cPs) 6,000
    Color Black, Tan
    Arc Resistance (sec) Arc
    Fungus Resistance Fungus
    High Temperature Resistance (°C) 130, Outstanding thermal shock resistance
    Low Temperature Resistance (°C) -65
    Other Resistance Reversion resistant
    Volume Resistivity (O) 1.6e14 (ohms/cm), 3.7e9 (ohms/cm)
    Key Specifications UL (Underwriters Laboratory), ULC (Underwriters Laboratories of Canada), NFPA (National Fire Protection Association): UL 94: UL Recognized, 94V-O, Mil-Spec (United States Military Standard): MIL-STD-810B
  • Technical Data for Elantas (Altana) Conathane EN-2541

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 2-Part
    • Material Form
      • Liquid
    • Industry
      • Electronics - Electrical/electronic potting, Electrical/electronic Casting, Electrical/electronic Encapsulant
    • Chemistry
    • Application Method
      • Roll
    • Cure Method
      • 2-Part Cure - Part A/Part B
    • Color
      • Black
      • Brown - Tan
    • Key Specifications
      • UL (Underwriters Laboratory), ULC (Underwriters Laboratories of Canada), NFPA (National Fire Protection Association) : UL 94 : V0 - UL Recognized, 94V-O
      • Mil-Spec (United States Military Standard) : STD-810B - MIL-STD-810B
    • Brand
      • Conathane
      • Cytec
    Specifications
    Cure Specs
    Cure Temperature (°C) 25, 60
    Cure Time (min) 7,200 to 10,080, 360
    Viscosity (cPs) 6,000 Test Method
    Set Time (min) 90, 15 Test Method
    Linear Shrinkage (%) 0.65
    Work / Pot Time (min) 70 Test Method
    Mix Ratio 16:100 (by weight)
    Bond Strength
    Tensile Strength (psi) 1,600 Test Method
    Material Resistance
    Arc Resistance (sec) Arc Test Method
    Flame Resistance Flame Resistance
    Fungus Resistance Fungus
    High Temperature Resistance (°C) 130, Outstanding thermal shock resistance Test Method
    Low Temperature Resistance (°C) -65 Test Method
    Other Resistance Reversion resistant
    Conductivity
    Dissipation Factor 0.02000, 0.35800, 0.01200, 0.05600 Test Method
    Filler Filled
    Dielectric Strength (V/mil) Excellent, 500 (vpm) Test Method
    Dielectric Constant 4.30, 7.40, 3.78, 4.73 Test Method
    Thermal Conductivity (W/m°K) 0.00 7.0e-4 Test Method
    Surface Resistivity (O) 1.0e14 (ohms), 5.4e9 (ohms) Test Method
    Volume Resistivity (O) 1.6e14 (ohms/cm), 3.7e9 (ohms/cm) Test Method
    Hardness
    Shore D Hardness 65 to 70 Test Method
    Elongation (%) 35 to 40 Test Method
    Flexibility Semi-flexible
    Other Properties
    Specific Gravity 1.650 Test Method
    Coefficient of Thermal Expansion (CTE) 15.1e-5 (in./ in/°F) Test Method
    Business Information
    Shelf Life Details CONATHANE® EN-2541 and EN-2543 have a shelf life of 18 months from date of manufacture, when stored at 65° to 85°F in the original unopened containers. If containers are opened and the contents only partially used, the containers should be thoroughly flushed with dry nitrogen (CONAP® Dri-Purge) immediately prior to resealing to prevent waste of material.;The fillers used in the Part B components of these systems may settle during shipment or subsequent storage. This should be checked carefully prior to mixing with Part A. Generally this is a soft settle and can easily be brought back into suspension by gentle mixing or by rolling on a roller.;Mix the two components together thoroughly in metal, plastic, or glass containers using metal or glass stirrers. Avoid paper containers and wooden sticks. Any moisture or water introduced into the system will cause bubbling and/or foaming during curing. To ensure void-free castings, the mixed system should be degassed under vacuum at 29”-30” Hg for 2-5 minutes. Mixing containers should be large enough to allow for frothing while under vacuum. When containers are opened and the contents only partially used, they should be flushed with dry nitrogen to prevent moisture contamination and subsequent waste of material.
    Shelf Life Temperature (°F) 65 to 85
    Shelf Life Type From date of manufacture
    Shelf Life (mon) 18
  • Best Practices for Elantas (Altana) Conathane EN-2541

    *See Terms of Use Below

    1. Mixing

      The fillers used in the Part B components of these systems may settle during shipment or subsequent storage. This should be checked carefully prior to mixing with Part A. Generally this is a soft settle and can easily be brought back into suspension by gentle mixing or by rolling on a roller.

      Mix the two components together thoroughly in metal, plastic, or glass containers using metal or glass stirrers. Avoid paper containers and wooden sticks. Any moisture or water introduced into the system will cause bubbling and/or foaming during curing. To ensure void-free castings, the mixed system should be degassed under vacuum at 29”-30” Hg for 2-5 minutes. Mixing containers should be large enough to allow for frothing while under vacuum.

  • Comparable Materials for Elantas (Altana) Conathane EN-2541

    *See Terms of Use Below

    Spec Engine® Results

Popular Articles

Testing the effectiveness of surface treatments

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

An Overview of Fluid Dispensing Systems & How They’re Used

Read Article

Characteristics of MMAs

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for Elantas (Altana) Conathane EN-2541

Gluespec Poll

What level of expertise do you have in specialty chemicals like adhesives, sealants, conformal coatings, etc.?
Set Time Test Methods
Set Time Set Temperature Test Method
90 min 25°C Room Temperature 1 lb. mass
15 min 60°C 1 lb. mass
Viscosity Test Methods
Viscosity Temperature
6,000 cPs 25°C Room Temperature
Work / Pot Time Test Methods
Work / Pot Time Test Method Temperature
70 min @ 25°C, 1 Lb. Mass 25°C Room Temperature
Tensile Strength Test Methods
Tensile Strength Test Method
1,600 psi ASTM D638
High Temperature Resistance Test Methods
High Temperature Resistance Test Method
130°C MIL-I-16923E
Outstanding thermal shock resistance
Low Temperature Resistance Test Methods
Low Temperature Resistance Test Method
-65°C MIL-I-16923E
Arc Resistance Test Methods
Arc Resistance Test Method
Arc ASTM D495
Dielectric Constant Test Methods
Dielectric Constant Temperature Test Method
4.30 25°C Room Temperature ASTM D150, 1 KHz
7.40 130°C ASTM D150, 1 KHz
3.78 25°C Room Temperature ASTM D150, 1 MHz
4.73 130°C ASTM D150, 1 MHz
Dielectric Strength Test Methods
Dielectric Strength Test Method
Excellent
500 (vpm) ASTM D149
Dissipation Factor Test Methods
Dissipation Factor Temperature Test Method
0.02000 25°C Room Temperature ASTM D150, 1 KHz
0.35800 130°C ASTM D150, 1 KHz
0.01200 25°C Room Temperature ASTM D150, 1 MHz
0.05600 130°C ASTM D150, 1 MHz
Surface Resistivity Test Methods
Surface Resistivity Temperature Test Method
1.0e14 (ohms) 25°C Room Temperature ASTM D257
5.4e9 (ohms) 130°C ASTM D257
Thermal Conductivity Test Methods
Thermal Conductivity Test Method
0.00 W/m°K 7.0e-4 MIL-I-16923E
Volume Resistivity Test Methods
Volume Resistivity Temp (°C) Test Method
1.6e14 (ohms/cm) 25°C Room Temperature ASTM D257
3.7e9 (ohms/cm) 130°C ASTM D257
Elongation Test Methods
Elongation Test Method
35 to 40 % ASTM D638
Shore D Hardness Test Methods
Shore D Hardness Shore Hardness Test Method
65 to 70 ASTM D2240
Coefficient of Thermal Expansion (CTE) Test Methods
Coefficient of Thermal Expansion (CTE) CTE Test Method
15.1e-5 (in./ in/°F) MIL-I-16923E
Specific Gravity Test Methods
Specific Gravity Temperature
1.650 25°C Room Temperature