Elantas (Altana) Easypoxy K-45 Datasheet Elantas (Altana) Easypoxy K-45

Information provided by Gluespec
  • Description for Elantas (Altana) Easypoxy K-45

    • Two-component • 100% solids • Room temperature or low heat cure • Epoxy adhesive system • High bond strength • Electrically insulating • Convenient mix ratio of 1:1 • Non-flowing paste.<br/>

    *See Terms of Use Below

    Brand Easypoxy
    Application Type Bond, Repair compound
    1 Part or 2 Part 2-Part
    Material Form Paste
    Substrate Aluminum, Ceramics, Glass, Metal, Most plastics, Wood, Etched aluminum
    Industry General-purpose
    Manufacturer Elantas (Altana)
    Chemistry Epoxy
    Application Method Spatula
    Cure Method Heat, Room temperature
    Cure Temperature (°C) 25, 65
    Cure Time (min) 1,440, 60
    Viscosity (cPs) Non-flow
    Color Light Amber
    Fungus Resistance Fungus Resistance
    Volume Resistivity (O) 2.5e-14 (ohm/cm)
    Key Specifications Comply with Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 (RoHS 2.0) as amended 31 March 2015
  • Technical Data for Elantas (Altana) Easypoxy K-45

    • Application Type
    • 1 Part or 2 Part
      • 2-Part
    • Material Form
      • Paste
    • Substrate
    • Industry
      • General Purpose - General-purpose
    • Chemistry
    • Application Method
      • Brush - Stiff brush
      • Spatula/Trowel - Spatula
    • Cure Method
      • Room Temperature / Air Dry - Room temperature
      • Heat
    • Color
      • Red - Light Amber
    • Key Specifications
      • RoHS (Restriction of Hazardous Substances) - Comply with Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 (RoHS 2.0) as amended 31 March 2015
    • Brand
      • Easypoxy
    Cure Specs
    Cure Temperature (°C) 25, 65
    Cure Time (min) 1,440, 60
    Viscosity (cPs) Non-flow
    Set Time (min) 4.00 to 6
    Linear Shrinkage (%) 1.00 Test Method
    Work / Pot Time (min) 4.00 to 6 Test Method
    Mix Ratio 1:1, 100:100 (by weight), 100:100 (by volume)
    Bond Strength
    General Bond Strength (psi) High
    Shear Strength (psi) 1,800, 2,500, 440 Test Method
    Compressive Strength (psi) 15,000 Test Method
    Flexural Strength (psi) 7,800 Test Method
    Tensile Strength (psi) 3,000 Test Method
    Material Resistance
    Fungus Resistance Fungus Resistance Test Method
    Dissipation Factor 0.02000 Test Method
    Dielectric Strength (V/mil) Electrically insulating
    Dielectric Constant 4.10 Test Method
    Thermal Conductivity (W/m°K) 0.20
    Volume Resistivity (O) 2.5e-14 (ohm/cm) Test Method
    Shore D Hardness 85 Test Method
    Flexibility Semi-Flexible
    Other Properties
    % Solids (%) 100
    Business Information
    Shelf Life Details Store at or below 25°C / 77°F in a dry controlled environment out of direct sunlight. This material should be suitable for use stored under these conditions in the original sealed containers for twelve (12) months from the date of shipment.
    Shelf Life Temperature (°F) <77
    Shelf Life Type From the date of shipment
    Shelf Life (mon) 12
  • Best Practices for Elantas (Altana) Easypoxy K-45

    *See Terms of Use Below

    1. Surface Preparation

      High-strength bonds can only be obtained if all surfaces to be bonded are free of moisture, dirt, rust, chemicals, and mold releases. In addition, surfaces to be bonded should be sandblasted, etched, or degreased.

    2. Application

      The bond surface must be dry and free from oil and dirt. Apply adhesive with a spatula or stiff brush to both joining surfaces. Apply light pressure to ensure proper wetting and contact of bonded surfaces.

    3. Mixing

      Mix equal parts of EASYPOXY® K-45 Part A Resin and K-45 Part B Hardener by weight or by volume until a uniform color is achieved.

  • Comparable Materials for Elantas (Altana) Easypoxy K-45

    *See Terms of Use Below

    Spec Engine® Results

Popular Articles

Electrically Conductive Adhesives

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Epoxy Adhesives for Medical Devices

Read Article

Testing the effectiveness of surface treatments

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for Elantas (Altana) Easypoxy K-45

Gluespec Poll

Who do you read or follow for engineering news and entertainment?
Linear Shrinkage Test Methods
Linear Shrinkage Test Method Temp
1.00 % ASTM D2566 25°C
Work / Pot Time Test Methods
Work / Pot Time Temperature
4.00 to 6 min 25°C
Tensile Strength Test Methods
Tensile Strength Cure Temperature Test Method
3,000 psi 25°C ASTM D412
Shear Strength Test Methods
Shear Strength Type Cure Temperature Substrate Test Method
1,800 psi Lap Shear Strength 55°C Etched aluminum / aluminum ASTM D1
2,500 psi Lap Shear Strength 25°C Etched aluminum / aluminum ASTM D1002
440 psi Lap Shear Strength 82°C Etched aluminum / aluminum ASTM D1002
Flexural Strength Test Methods
Flexural Strength Cure Temperature Test Method
7,800 psi 25°C ASTM D790
Compressive Strength Test Methods
Compressive Strength Cure Temperature Test Method
15,000 psi 25°C ASTM D695
Fungus Resistance Test Methods
Fungus Resistance Test Method
Fungus Resistance ASTM G21, non-nutrient
Dielectric Constant Test Methods
Dielectric Constant Temperature Test Method
4.10 25°C ASTM D150, 1 kHz
Dissipation Factor Test Methods
Dissipation Factor Temperature Test Method
0.02000 25°C ASTM D150, 1 kHz
Volume Resistivity Test Methods
Volume Resistivity Temp (°C) Test Method
2.5e-14 (ohm/cm) 25°C 1 kHz, ASTM D257
Shore D Hardness Test Methods
Shore D Hardness Shore Hardness Test Method Hardness Temperature
85 ASTM D2240 25°C