Brand Cytec Application Type Bond 1 Part or 2 Part 2 Part Material Form Liquid Substrate Glass, Metal, Plastic Industry Gears, Industrial truck tires Manufacturer Elantas (Altana) Chemistry isocyanate terminated prepolymers Cure Method 2 Parts Cure Temperature (°C) 100, 100 Cure Time (min) 480, 360 Viscosity (cPs) 6,000, 300 Color Light Amber
Technical Data for Elantas (Altana) RN-1558
- Adhesive - Bond
1 Part or 2 Part
- 1 Part or 2 Part - 2 Part
- Trucks - Industrial truck tires
- Other - Rolls, Metal forming dies, Seals, Abrasion resistant belts, Casters, Bushings, Impellers
- Other - isocyanate terminated prepolymers
- Dispenser - automatic metering, mixing equipment
- 2-Part Cure - 2 Parts
- Red - Light Amber
Cure Temperature (°C) 100, 100 Cure Time (min) 480, 360 Viscosity (cPs) 6,000, 300 Test Method Work / Pot Time (min) 4.00 to 11
Tear Strength (piw) Good, 260 (pli), 250 (pli) Tensile Strength (psi) Good, 1,600, 400, 550, 2,000, 550, 700 Test Method
Abrasion Resistance good abrasion resistance
Shore A Hardness 70, 70, 80 Shore D Hardness 55, 20 Elongation (%) Exceptional elongation, 1,100, 900
Specific Gravity 1.040 Test Method
Best Practices for Elantas (Altana) RN-1558
Pour mixed system into molds, preheated to 80-100°C that have been coated with CONAP® MR-5002 or equivalent, mold releases.
Automatic metering and mixing equipment can be used with these systems
Heat pre-weighed amounts of CONATHANE® prepolymer to 80-100°C and degas at 1-5 mm of vacuum for at least 5 minutes, or until excessive bubbling stops. Containers should be unlined metal, plastic, or glass, and should be large enough to allow for foaming during degassing.
When adding MbOCA to CONATHANE®, the MbOCA must be melted at 120°C prior to mixing. After adding curative, mix thoroughly and degas at 1-5 mm for 1 to 2 minutes.
Comparable Materials for Elantas (Altana) RN-1558
Spec Engine® Results
Closest Results from this Manufacturer
Questions about this material?
Get personal assistance with your specific application needs.
Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of MaterialsRead Article
Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:Read Article
Viscosity Test Methods
Tensile Strength Test Methods
|Tensile Strength||Test Method|
|1,600 psi||Die D|
|400 psi||Die D,100% modulus|
|550 psi||Die D,300% modulus|
|2,000 psi||Die D|
|550 psi||Die D,100% modulus|
|700 psi||Die D,300% modulus|
Specific Gravity Test Methods