Elantas (Altana) TU-956 Datasheet Elantas (Altana) TU-956

CONTACT REP
Information provided by Gluespec

  • Description for Elantas (Altana) TU-956

    A two component liquid casting system that has a long pot life, low viscosity, good green strength and high temperature tolerance.

    *See Terms of Use Below

    Brand Cytec
    Application Type Adhesive
    1 Part or 2 Part 2-Part
    Material Form Liquid
    Manufacturer Elantas (Altana)
    Chemistry Epoxy
    Cure Method Part A/Part B
    Cure Temperature (°C) 25, 80, 80
    Cure Time (min) 960, 180, 960
    Viscosity (cPs) 5,000
    Color Amber, Translucent
    Volume Resistivity (O) 5.9e12 (ohms-cm)

  • Technical Data for Elantas (Altana) TU-956

    *See Terms of Use Below

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 2-Part
    • Material Form
      • Liquid
    • Chemistry
      • Other - Epoxy
    • Cure Method
      • 2-Part Cure - Part A/Part B
    • Color
      • Translucent
      • Red - Amber
    • Brand
      • Cytec
    Specifications
    Cure Specs
    Cure Temperature (°C) 25, 80, 80
    Cure Time (min) 960, 180, 960
    Viscosity (cPs) 5,000
    Linear Shrinkage (%) 0.0010 (in./in.), 0.0094 (in./in.) Test Method
    Work / Pot Time (min) 8 Test Method
    Mix Ratio 100:28.5 (by volume), 100:28 (by weight)
    Bond Strength
    Impact Strength (psi) 6, 7 Test Method
    Flexural Strength (psi) 1,100
    Tear Strength (piw) 615 (psi), 135 (pli) Test Method
    Tensile Strength (psi) 5,400, 1,750, 3,900 Test Method
    Conductivity
    Dissipation Factor 0.05200, 0.30000, 0.05600 Test Method
    Dielectric Strength (V/mil) 610 (vpm)
    Dielectric Constant 5.37, 5.43, 4.30 Test Method
    Volume Resistivity (O) 5.9e12 (ohms-cm)
    Hardness
    Shore D Hardness 55
    Elongation (%) 400
    Modulus (psi) 1,750, 3,900 Test Method
    Other Properties
    Specific Gravity 1.090 Test Method

  • Best Practices for Elantas (Altana) TU-956

    *See Terms of Use Below

  • Comparable Materials for Elantas (Altana) TU-956

    *See Terms of Use Below

    Spec Engine® Results

    • Dow
      Sylgard 184 Silicone Elastomer(Dow)

      Two part; 10:1 mix; minimal shrinkage; no exotherm during cure; no solvents or cure byproducts; deep section cure; repairable; good dielectric properties; flexible elastomer.

    • Henkel
      Loctite Stycast ES 1901(Henkel)

      A fast-setting, thoughened, medium-viscosity, industrial grade epoxy adhesive. Once mixed, the two-component epoxy cures at room temperature with low shrinkage and forms an ultra clear bondline with excellent peel resistance.

    • 3M
      DP640(3M)

      Brown is a two-part, non-sag/thixotropic urethane adhesives. It provides tough, flexible bonds with good adhesion to a wide variety of substrates.

    • Compare All

    Closest Results from this Manufacturer

  Download Technical Data Sheet   Save This Material   Compare View Saved Items

Popular Articles

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Testing the effectiveness of surface treatments

Read Article

Lightweighting drives automotive adhesives demand

Read Article

6 objects held together by adhesives you probably can't live without

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for Elantas (Altana) TU-956

All Elantas (Altana) Materials
View Now

Gluespec Poll

When you're researching or sourcing materials online, what device are you using?
Linear Shrinkage Test Methods
Linear Shrinkage Temp
0.0010 (in./in.) 25°C
0.0094 (in./in.) 80°C
Work / Pot Time Test Methods
Work / Pot Time Temperature
8 min 25°C
Impact Strength Test Methods
Impact Strength Test Method
6 psi Method A
7 psi Method B
Tear Strength Test Methods
Tear Strength Test Method
615 (psi) Die C
135 (pli) Split
Tensile Strength Test Methods
Tensile Strength Test Method
5,400 psi
1,750 psi 100% modulus
3,900 psi 300% modulus
Dielectric Constant Test Methods
Dielectric Constant Temperature Test Method
5.37 25°C Dielectric constant, 100 Hz
5.43 25°C Dielectric constant, 1 KHz
4.30 25°C Dielectric Constant, 1 MHz
Dissipation Factor Test Methods
Dissipation Factor Temperature Test Method
0.05200 25°C Dissipation Factor, 100 Hz
0.30000 25°C Dissipation Factor, 1 KHz
0.05600 25°C Dissipation factor, 1 MHz
Modulus Test Methods
Modulus Test Method
1,750 psi 100% Modulus
3,900 psi 300% Modulus
Specific Gravity Test Methods
Specific Gravity Temperature
1.090 25°C