Elantas (Altana) UC-51 Datasheet Elantas (Altana) UC-51

CONTACT REP
Information provided by Gluespec

  • Description for Elantas (Altana) UC-51

    Produces tough polyurethane castings with good flexural modulus, good impact resistance, and the feel of reinforced polypropylene or an engineering thermoplastic. The system is designed for quick mold turnover in either silicone or polyurethane tooling.

    Note: This material has been discontinued. Please view the Comparable Materials tab or call us at (262) 293-7970 for additional help.

    *See Terms of Use Below

    Brand Cytec
    Application Type Bond, casting
    1 Part or 2 Part 2-Part
    Material Form Liquid
    Substrate Engineering thermoplastic, Polypropylene, Polyurethane
    Industry Designed for quick mold turnover in silicone tooling, Designed for quick mold turnover in polyurethane tooling
    Manufacturer Elantas (Altana)
    Chemistry Silicone, Polyurethane
    Cure Method Part A/Part B
    Cure Temperature (°C) 25, 80, 20 to 25
    Viscosity (cPs) 350

  • Technical Data for Elantas (Altana) UC-51

    *See Terms of Use Below

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 2-Part
    • Material Form
      • Liquid
    • Substrate
    • Industry
      • Industrial
      • Tooling & Composites - Designed for quick mold turnover in polyurethane tooling, Designed for quick mold turnover in silicone tooling
    • Chemistry
    • Application Method
      • Dispenser - machine dispensing, two-barreled cartridges, automated meter mix equipment
    • Cure Method
      • 2-Part Cure - Part A/Part B
    • Brand
      • Cytec
    Specifications
    Cure Specs
    Cure Temperature (°C) 25, 80, 20 to 25 Test Method
    Viscosity (cPs) 350 Test Method
    Linear Shrinkage (%) Low, 0.0021 (in./in.), 0.0021 (in./in.) Test Method
    Mix Ratio 100:100 (RT) (by volume), 100:120 (by weight)
    Bond Strength
    Impact Strength (psi) 0.26/1.36 (ft.lb./in.) Test Method
    Flexural Strength (psi) 6,250 Test Method
    Tear Strength (piw) 170 (pli) Test Method
    Tensile Strength (psi) 5,500 Test Method
    Material Resistance
    Impact Resistance good impact resistance
    Hardness
    Shore D Hardness 80:80 Test Method
    Elongation (%) 2, 2 Test Method
    Modulus (psi) good flexural, 200,000 Test Method
    Other Properties
    Specific Gravity 1.340, 1.340 Test Method
    Business Information
    Shelf Life Details Both Part A and Part B components are moisture sensitive. Avoid the use of paper cups and wooden sticks. Unless the contents are used within one day, we recommend flushing with dry nitrogen or CONAP® DRI-PURGE each time the containers are closed., The shelf life of CONATHANE® UC-51, Part A and Part B, is 18 months from date of manufacture when stored in their original, unopened containers at 65°-85°F.
    Shelf Life Temperature (°F) 149 to 185
    Shelf Life Type From date of manufacture
    Shelf Life (mon) 18

  • Best Practices for Elantas (Altana) UC-51

    *See Terms of Use Below

    1. Mixing

      Mix the Part B to ensure uniform distribution of the filler.

      Mix the two-components together thoroughly at the 1:1 volumetric ratio at 25ºC.

    2. Deairing/Degassing

      Degassing each component before mixing reduces the potential formation of air bubbles in the cast part.

  • Comparable Materials for Elantas (Altana) UC-51

    *See Terms of Use Below

    Spec Engine® Results

    • Elantas (Altana)
      Conathane UC-40(Elantas (Altana))

      An unfilled, two-component, room temperature curing, 100%-solids urethane casting system, excellent handling properties, high impact resistance, excellent machinability.

    • Elantas (Altana)
      Conathane UC-41(Elantas (Altana))

      An unfilled, two-component, room temperature curing, 100%-solids urethane casting system, excellent handling properties, high impact resistance, excellent machinability.

    • Elantas (Altana)
      Conap AD-6402(Elantas (Altana))

      A two-component, unfilled, polyurethane system. Adhesive, sealant and encapsulant formulated for use in water and food contact applications.

    • Compare All
  Download Technical Data Sheet   Save This Material   Compare View Saved Items

Popular Articles

Electrically Conductive Adhesives

Read Article

6 objects held together by adhesives you probably can't live without

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Testing the effectiveness of surface treatments

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for Elantas (Altana) UC-51

All Elantas (Altana) Materials
View Now

Gluespec Poll

What level of expertise do you have in specialty chemicals like adhesives, sealants, conformal coatings, etc.?
Cure Temperature Test Methods
Cure Temperature Cure Time Test Method
25°C Demold Time
80°C Post Cure
20 to 25°C Alternate Post Cure
Cure Time Test Methods
Cure Time Test Method
Linear Shrinkage Test Methods
Linear Shrinkage Test Method
Low
0.0021 (in./in.) Linear Shrinkage is measure on a 1" x 1/2" x 8" bar.
0.0021 (in./in.) Linear Shrinkage is measure on a 1" x 1/2" x 8" bar.
Viscosity Test Methods
Viscosity Temperature
350 cPs 25°C
Work / Pot Time Test Methods
Work / Pot Time Temperature
Flexural Strength Test Methods
Flexural Strength Cure Temperature Test Method
6,250 psi 25°C ASTM D790
Impact Strength Test Methods
Impact Strength Cure Temperature Test Method
0.26/1.36 (ft.lb./in.) 25°C ASTM D256, Notched/Unnotched
Tear Strength Test Methods
Tear Strength Cure Temperature Test Method
170 (pli) 25°C Die C
Tensile Strength Test Methods
Tensile Strength Cure Temperature Test Method
5,500 psi 25°C ASTM D412
Elongation Test Methods
Elongation Test Method
2 % ASTM D412,at (RT)
2 % ASTM D412, at 80 [C]
Modulus Test Methods
Modulus Test Method
good flexural
200,000 psi ASTM D790
Shore D Hardness Test Methods
Shore D Hardness Shore Hardness Test Method
80:80 ASTM D2240 at RT
Density Test Methods
Density Temperature Test Method
Specific Gravity Test Methods
Specific Gravity Temperature Test Method
1.340 25°C ASTM D792, @ 25 (C)
1.340 80°C ASTM D792, @ 25 ©