Henkel Armstrong A-12 Epoxy Resin 2:3 Datasheet Henkel Armstrong A-12 Epoxy Resin 2:3

Information provided by Gluespec
  • Description for Henkel Armstrong A-12 Epoxy Resin 2:3

    A general purpose adhesive, combines low toxicity with good physical properties. This two-part adhesive has a non-critical mixing ratio with 1:1 used most frequently. The mix ratio can be varied to obtain a more flexible or more rigid bond by increasing or decreasing respectively, the concentration of Part B.

    *See Terms of Use Below

    Brand Loctite, Armstrong
    Application Type Bond
    1 Part or 2 Part 2 Part
    Material Form Liquid
    Substrate Al, Ceramic, Metal, Plastics, Wood
    Manufacturer Henkel
    Chemistry Epoxy
    Cure Method 2-Part Cure
    Cure Temperature (°C) 74
    Cure Time (min) 120
    Viscosity (cPs) 80,000
    High Temperature Resistance (°C) 82
    Low Temperature Resistance (°C) -51
  • Best Practices for Henkel Armstrong A-12 Epoxy Resin 2:3

    *See Terms of Use Below

    1. Surface Preparation

      The surfaces to be bonded should be clean and dry (for critical applications refer to our suggested surface preparation procedures - Bulletin No. 964)

    2. Application

      Apply the adhesive to surfaces to be bonded (preferably both surfaces) and press together. Light clamping may be used to keep parts in position during curing.

    3. Mixing

      Thoroughly mix the A-12 Part B with the A-12 part A in a clean discardable container using correct mix ratio. Avoid the introduction of excess air.

  • Comparable Materials for Henkel Armstrong A-12 Epoxy Resin 2:3

    *See Terms of Use Below

    Spec Engine® Results

Popular Articles

Testing the effectiveness of surface treatments

Read Article

Electrically Conductive Adhesives

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Epoxies in the Medical Device Industry

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Gluespec Poll

Who do you read or follow for engineering news and entertainment?
Cure Temperature Test Methods
Cure Temperature Cure Time Test Method
74°C Optimum cure
Cure Time Test Methods
Cure Time Test Method
120 min Optimum cure
Work / Pot Time Test Methods
Work / Pot Time Test Method Temperature
120 min 100 gms @77°F 25°C
60 min 1# @ 77°F 25°C
Cleavage Strength Test Methods
Cleavage Strength Cure Time Cure Temperature
General Bond Strength Test Methods
General Bond Strength Cure Time Cure Temperature
1,800 psi 120 min 165°C
Tensile Strength Test Methods
Tensile Strength Type Cure Time Cure Temperature Substrate
2,900 psi 120 min 74°C
Shear Strength Test Methods
Shear Strength Type Cure Time Cure Temperature Substrate Test Temperature
4,000 psi Tensile Shear Strength 120 min 74°C al/al 25°C
500 psi Tensile Shear Strength 120 min 74°C al/al 82°C
3,000 psi Tensile Shear Strength 120 min 74°C al/al -51°C
Specific Gravity Test Methods
Specific Gravity Temperature
1.330 25°C