Henkel Armstrong A-298
Brand Armstrong Application Type Adhesive 1 Part or 2 Part 2-Part Material Form Liquid Substrate ceramics, Metal, plastics Manufacturer Henkel Chemistry Epoxy Cure Method 2 Parts Cure Time (min) Cure as desired Viscosity (cPs) 1,800
Technical Data for Henkel Armstrong A-298
Cure Time (min) Cure as desired Viscosity (cPs) 1,800 Work / Pot Time (min) Long Test Method Mix Ratio 3:2 (by volume), 3:2 (by weight)
Elongation (%) 10
Specific Gravity 1.120 to 1.200, 0.960 to 0.980 Test Method
Shelf Life Details Store below 25°C out of sunlight and in original unopened containers., Refer to packaging specific quote for shelf life information. Shelf Life Temperature (°F) <77
Best Practices for Henkel Armstrong A-298
Surface to be bonded should be clean and dry. For critical applications refer to Bulletin No. 964
Apply the adhesive to surfaces to be bonded (preferably both surfaces) and press together.
Thoroughly mix the Part B with the Part A in a clean, discardable container, using correct mix ratio. Avoid introduction of excess air.
Light clamping may be used to keep parts in position during cure.
Cure as desired
Comparable Materials for Henkel Armstrong A-298
Spec Engine® Results