Henkel Bondmaster M1325 Datasheet Henkel Bondmaster M1325

CONTACT REP
Information provided by Gluespec

  • Description for Henkel Bondmaster M1325

    • Structural Acrylic Adhesive • Room temperature cure • Long open time, suitable for bonding large areas<br/>• Excellent adhesion to many plastics and metals • Good toughness and durability • Environmentally friendly – 100% solids • Excellent gap-filling capability • High peel and impact strength •<br/>

    *See Terms of Use Below

    Brand Bondmaster
    Application Type Bond, Seal
    1 Part or 2 Part 2 Part
    Material Form Liquid
    Substrate Acrylic, Aluminum, Ceramics, Composite, Metal, Nylon, many plastics, Polycarbonate, PVC, Steel, stone, Dissimilar materials, Fiberglass, polystyrenes, plated metals., reinforced plastics, ABS
    Manufacturer Henkel
    Chemistry Structural acrylic, Solvent-free
    Cure Method Resin/Activator
    Cure Temperature (°C) 20 to 25, 25
    Cure Time (min) 1,440 to 2,880
    Viscosity (cPs) 200,000
    Color Straw
    Fatigue Resistance Fatigue resistance
    High Temperature Resistance (°C) 138
    Low Temperature Resistance (°C) -54

  • Technical Data for Henkel Bondmaster M1325

    *See Terms of Use Below

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1 Part or 2 Part - 2 Part
    • Material Form
      • Liquid
    • Substrate
    • Industry
      • Industrial
      • Other - large areas, replacing rivets or welding, load bearing joints that require structural integrity.
    • Chemistry
    • Cure Method
      • 2-Part Cure - Resin/Activator
    • Color
      • Yellow - Straw
    • Brand
      • Bondmaster
    Specifications
    Cure Specs
    Cure Temperature (°C) 20 to 25, 25
    Cure Time (min) 1,440 to 2,880
    Viscosity (cPs) 200,000 Test Method
    Fixture or Handling Strength Time (min) 120 Test Method
    Work / Pot Time (min) Long, 25 Test Method
    Mix Ratio 1:1 (by volume), 1:1 (by weight)
    Bond Strength
    Structural/Load-Bearing Structural
    Peel Strength (piw) High, 35 (lb/linear inch), 25 (lb/linear inch), Peel Resistance Test Method
    Shear Strength (psi) Superior, 4,800, 4,200, 650, 500, 900, 500 Test Method
    Impact Strength (psi) High, 30 Test Method
    Material Resistance
    Fatigue Resistance Fatigue resistance
    Environmental Resistance Environmental resistance Test Method
    High Temperature Resistance (°C) 138
    Impact Resistance Impact resistance
    Low Temperature Resistance (°C) -54
    Hardness
    Flexibility Flexibility
    Other Properties
    Specific Gravity 1.010
    Flash Point (°F) 50.0
    % Solids (%) 100
    Business Information
    Shelf Life Details Resin, Activator, BONDMASTER M1325 has a shelf life of 6 months when stored at 5°C-25°C (40°F-77°F). Keep away from excessive heat, sparks, flame, and sunlight.
    Shelf Life Temperature (°F) 72, 72, 41 to 77
    Shelf Life (mon) 6, 6, 6

  • Best Practices for Henkel Bondmaster M1325

    *See Terms of Use Below

    1. Application

      Apply the product to the bonding surface at room temperature, minimum 65 F. Apply sufficient material to provide full coverage to the bonding area. Mate the adhesive coated surfaces.

    2. Surface Preparation

      The adhesive will adhere well to most surfaces without special preparation. For highest bond strength and optimum performance, the bonding surfaces should be clean and dry, and free from surface contaminants.

      For optimum adhesive bonding properties all paint, oils, dust, mold release agents and all other surface contaminants should be completely removed prior to bonding.

    3. Curing

      Apply contact pressure with clips or clamps to fixture the parts until cured.

    4. Clean-Up

      Unreacted adhesive can be cleaned up using acetone, isopropanol or glycol ethers.

  • Comparable Materials for Henkel Bondmaster M1325

    *See Terms of Use Below

    Spec Engine® Results

    Closest Results from this Manufacturer

    • Henkel
      Loctite AA H4100(Henkel)

      A non-sagging, two component, room temperature curing, 10:1 mix ratio, methacrylate adhesive system, provide handling strength within minutes.

    • Henkel
      Initiator #5(Henkel)

      • Structural Acrylic Activator • Nonflammable • Solvent Free (100% Solids) • Environmentally Friendly • Flexible Initiator / Adhesive Ratio - Consistent Bond Strength • User Friendly • Requires No Drying Time •

    • Henkel
      534(Henkel)

      • Structural Acrylic Activator • Nonflammable • Solvent Free (100% Solids) • Environmentally Friendly • Flexible Activator / Adhesive Ratio - Consistent Bond Strength • User Friendly • Requires No Drying Time •

    • Compare All
  Download Technical Data Sheet   Save This Material   Compare Saved Items

Popular Articles

Silicones in LED Lighting | Gluespec

Read Article

What Are the Differences Between Adhesives and Sealants?

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Testing the effectiveness of surface treatments

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for Henkel Bondmaster M1325

Composite Bonding
View Now

Gluespec Poll

When you're researching or sourcing materials online, what device are you using?
Fixture or Handling Strength Time Test Methods
Fixture or Handling Strength Time Fixture-Handling Strength Time Temperature
120 min 25°C
Viscosity Test Methods
Viscosity Test Method Temperature
200,000 cPs at 25°C (77°F), The adhesive is thixotropic 25°C
Work / Pot Time Test Methods
Work / Pot Time Test Method Temperature
Long
25 min at 25°C (77°F), The open time refers to the on-part life of the adhesive before assembly 25°C
Impact Strength Test Methods
Impact Strength Substrate Test Method
High
30 psi Steel/Steel ASTM 950
Peel Strength Test Methods
Peel Strength Substrate Test Method
High
35 (lb/linear inch) Steel/Steel ASTM 1876
25 (lb/linear inch) Al/Al ASTM 1876
Peel Resistance Al/Al ASTM 1876
Shear Strength Test Methods
Shear Strength Type Cure Temperature Substrate Test Method
Superior 25°C Metals: Steel/Steel ASTM D1002
4,800 psi Lap Shear strength 25°C Metals: Aluminum/Aluminum ASTM D1002
4,200 psi Lap Shear strength 25°C Plastics: Acrylic/Acrylic ASTM D1002, substrate failure
650 psi Lap Shear strength 25°C Plastics: ABS/ABS ASTM D1002, substrate failure
500 psi Lap Shear strength 25°C Plastics: Polycarbonate/Polycarbonate ASTM D1002, substrate failure
900 psi Lap Shear strength 25°C Plastics: PVC/PVC ASTM D1002, substrate failure
500 psi Lap Shear strength
Environmental Resistance Test Methods
Environmental Resistance Test Method
Environmental resistance ASTM D 1183