

-
Description for Henkel ESP311
• High Strength • Toughened Epoxy Adhesive • Structural Metal Bonding • Structural Thermoset Plastic Bonding • Bonding Motor Housing Assemblies • One Component • High Strength • Sag Resistant Paste<br/>• Excellent Bonding for Severe Service Conditions • Excellent Impact and Vibration Resistance •<br/>Brand Bondmaster Application Type Bond 1 Part or 2 Part 1-Part Material Form Paste Substrate Metal, Plastics, Steel, Thermoset Plastics Industry Motor Housing Assemblies Manufacturer Henkel Chemistry Epoxy, Toughened Cure Method Heat Cure Temperature (°C) 120, 160, 175 Cure Time (min) 45, 10, 3.00 Color Gray High Temperature Resistance (°C) 180 Low Temperature Resistance (°C) -40 -
Technical Data for Henkel ESP311
Overview
-
Application Type
- Adhesive - Bond
-
1 Part or 2 Part
- 1-Part
-
Material Form
- Paste
-
Industry
- Industrial - Batteries, Compressors
- Motors - Motor Housing Assemblies
-
Chemistry
- Toughened
- Epoxy
-
Cure Method
- Heat
-
Color
- Gray
-
Brand
- Bondmaster
Specifications
Cure Specs
Cure Temperature (°C) 120, 160, 175 Cure Time (min) 45, 10, 3.00 Bond Strength
Structural/Load-Bearing Structural General Bond Strength (psi) High Shear Strength (psi) >1,800, >1,800 Test Method Impact Strength (psi) Impact strength Material Resistance
High Temperature Resistance (°C) 180 Impact Resistance Excellent impact resistance Low Temperature Resistance (°C) -40 Vibration Resistance/Shock Resistance Excellent vibration resistance Conductivity
Filler Metallic Hardness
Shore D Hardness >85, >72 Test Method Other Properties
Specific Gravity 1.500 Flash Point (°F) >199.4 % Solids (%) 100 Business Information
Shelf Life Details The shelf life is 2 months at 25°C (77°F). Shelf Life (mon) 2 -
-
Best Practices for Henkel ESP311
-
Surface Preparation
Bondmaster ESP 311 bonds well to even poorly prepared metal surfaces. For optimum bond strength and durability, the substrate surfaces to be bonded should be clean and dry. Chemical treatment of metallic surfaces gives optimum durability, but a simple abrade and degrease process may often be adequate. Cleaning or degreasing of plastic and composite surfaces is generally recommended to remove mold release agents which may inhibit optimum bonding results.
-
Clean-Up
Unreacted epoxy can be cleaned using acetone, isopropanol, MEK or Glycol Ethers.
-
-
Comparable Materials for Henkel ESP311
Spec Engine® Results
Popular Articles
Testing the effectiveness of surface treatments
Read ArticleInfographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation
Read ArticleElectrically Conductive Adhesives
Read ArticleEpoxy Adhesives for Medical Devices
Read ArticleSponsored Articles
Unique Advantages of Contact Adhesives
Read ArticleUsing LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials
Read ArticleSylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:
Read ArticleCase Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive
Read ArticleFeatured Ads
