

-
Description for Henkel ESP313
• High Strength • Rapid Cure • Epoxy Adhesive • Structural Metal Bonding • Bonding Magnet and Speaker Assemblies • Bonding of Batteries • Bonding of Compressors • Bonding HVAC Tube Assemblies • One Component • High Strength • Sag Resistant Paste • Resistant to Severe Chemical Exposure Conditions • Heat Resistant • Rapid Heat Cure •<br/>Brand Bondmaster Chemical Resistance Severe Chemical Exposure resistance, Chemical Resistance: Excellent solvent resistance, Chemical Resistance: Fluid Resistance: Excellent water resistance Application Type Bond 1 Part or 2 Part 1-Part Material Form Paste Substrate Aluminum, Metal, Plastics, Steel Manufacturer Henkel Chemistry Epoxy Cure Method Rapid heat Cure Temperature (°C) 100, 120, 160, 200 Cure Time (min) Rapid, 90, 30, 5.00, 0.67 Viscosity (cPs) Non-sag Color Gray Paste High Temperature Resistance (°C) 180 Low Temperature Resistance (°C) -40 -
Technical Data for Henkel ESP313
Overview
-
Chemical Resistance
- Chemical Resistance : Fluid Resistance : Water Resistance - Excellent water resistance
- Chemical Resistance - Severe Chemical Exposure resistance
- Chemical Resistance : Relative Solvent Resistance - Excellent solvent resistance
-
Application Type
- Adhesive - Bond
-
1 Part or 2 Part
- 1-Part
-
Material Form
- Paste
-
Industry
- Industrial - Batteries, Compressors
-
Chemistry
-
Cure Method
- Heat - Rapid heat
-
Color
- Gray - Gray Paste
-
Brand
- Bondmaster
Specifications
Cure Specs
Cure Temperature (°C) 100, 120, 160, 200 Cure Time (min) Rapid, 90, 30, 5.00, 0.67 Viscosity (cPs) Non-sag Bond Strength
General Bond Strength (psi) High Shear Strength (psi) 3,000, 3,500, 3,300, 3,600 Test Method Material Resistance
High Temperature Resistance (°C) 180 Low Temperature Resistance (°C) -40 Conductivity
Filler Metallic Hardness
Shore D Hardness 85, 80 Test Method Other Properties
Specific Gravity 1.500 Outgassing 0.39 (%TML), 0.00 (%CVCM) Flash Point (°F) >199.4 % Solids (%) 100 Business Information
Shelf Life Details Bondmaster ESP 313 should be kept away from excessive heat, sparks, flame, and direct sunlight. If stored in a refrigerator. the epoxy should always be allowed to reach ambient temperature before it is used. The shelf life of Bondmaster ESP 313 is 2 months at 25°C (77°F) Usable shelf life may vary depending on application and storage temperature. Shelf Life (mon) 2 -
-
Best Practices for Henkel ESP313
-
Surface Preparation
Bondmaster ESP 313 bonds well to even poorly prepared metal surfaces. For optimum bond strength and durability, the substrate surfaces to be bonded should be clean and dry. Chemical treatment of metallic surfaces gives optimum durability, but a simple abrade and degrease process may often be adequate.
-
Clean-Up
Unreacted epoxy can be cleaned using acetone, isopropanol, MEK or Glycol Ethers.
-
-
Comparable Materials for Henkel ESP313
Spec Engine® Results
Popular Articles
Testing the effectiveness of surface treatments
Read ArticleEpoxy Adhesives for Medical Devices
Read ArticleElectrically Conductive Adhesives
Read ArticleInfographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation
Read ArticleSponsored Articles
Unique Advantages of Contact Adhesives
Read ArticleUsing LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials
Read ArticleSylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:
Read ArticleCase Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive
Read ArticleFeatured Ads

Shear Strength Test Methods
Shear Strength | Type | Substrate | Test Temperature |
---|---|---|---|
3,000 psi | Lap shear strength | Al to Al | 25°C |
3,500 psi | Lap shear strength | Al to Al | 150°C |
3,300 psi | Lap shear strength | Steel to steel | 25°C |
3,600 psi | Lap shear strength | Steel to steel | 150°C |
Shore D Hardness Test Methods
Shore D Hardness | Hardness Temperature |
---|---|
85 | 25°C |
80 | 120°C |