Brand Bondmaster Application Type Bond 1 Part or 2 Part 2 Part Material Form Liquid Substrate Aluminum, Copper, Steel, Stainless Steel, zinc, copper alloys, porous surfaces Manufacturer Henkel Chemistry Acrylic Cure Method 2 Part Cure Temperature (°C) 20 to 25 Cure Time (min) rapidly Viscosity (cPs) 30,000 (mPa.s) Color Off-white Fatigue Resistance Fatigue Chemical Resistance Excellent Chemical Resistance High Temperature Resistance (°C) 120 Low Temperature Resistance (°C) -60 Other Resistance impact loads
Technical Data for Henkel F241
Cure Temperature (°C) 20 to 25 Cure Time (min) rapidly Viscosity (cPs) 30,000 (mPa.s) Fixture or Handling Strength Time (min) 2.00 to 5.00, 0.50 to 1.00
Peel Strength (piw) 150 (N/25mm), Peel Resistance Test Method Shear Strength (psi) 5,076 Test Method
Fatigue Resistance Fatigue Chemical Resistance Excellent Chemical Resistance Environmental Resistance Excellent Environmental Resistance High Temperature Resistance (°C) 120 Low Temperature Resistance (°C) -60 Other Resistance impact loads
Specific Gravity 1.000
Shelf Life Details Storage: When stored in the original unopened containers at 5-25°C, the shelf life of this product is 12 months from the date of despatch from Bondmaster., The adhesive and Initiator should be stored in original containers with caps/lids tightly fitted and out of direct sunlight. Never pour material back into the container once dispensed. Shelf Life Temperature (°F) 41 to 77 Shelf Life Type From date of despatch Shelf Life (mon) 12
Best Practices for Henkel F241
F241 must be applied as a bead - do not spread or comb out the adhesive as this will result in reduced bond strength. The maximum on-part life of F241 is 5 minutes and assembly must occur within this time if ultimate performance is to be achieve
Comparable Materials for Henkel F241
Spec Engine® Results
Closest Results from this Manufacturer
Questions about this material?
Get personal assistance with your specific application needs.