Henkel Initiator #1

Henkel Initiator #1 Datasheet
  • Description for Henkel Initiator #1

    The initiator is solvent free hence no drying time is required and parts can be bonded immediately after the initiator is applied to the bonding surface.

    *See Terms of Use Below

    Brand Loctite
    Application Type Bond
    1 Part or 2 Part 2 Part
    Material Form Wipe
    Manufacturer Henkel
    Chemistry Acrylic, Solvent-free
    Cure Method 2-Part Cure
    Viscosity (cPs) <60
    Color Amber to light-brown
  • Technical Data for Henkel Initiator #1

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1 Part or 2 Part - 2 Part
    • Material Form
      • Wipe
    • Chemistry
    • Application Method
      • Brush - Wipe
      • Spray
    • Cure Method
      • 2-Part Cure
    • Color
      • Red - Amber to light-brown
    • Brand
      • Loctite
    Specifications
    Cure Specs
    Viscosity (cPs) <60 Test Method
    Fixture or Handling Strength Time (min) >5.00 Test Method
    Work / Pot Time (min) 30
    Mix Ratio 15:1 (by volume)
    Bond Strength
    Structural/Load-Bearing Structural
    Hardness
    Flexibility Flexible
    Other Properties
    Specific Gravity 0.9765 (g/cm3) Test Method
    Flash Point (°F) >300.2
    % Solids (%) 100
    Business Information
    Shelf Life Details When stored in the original unopened containers at or below 25°C, the shelf life of this product is 24 months. Keep containers in a cool place away from sparks, flame, excessive heat and sunlight. Do not freeze.
    Shelf Life (mon) 24
  • Best Practices for Henkel Initiator #1

    *See Terms of Use Below

    1. Mixing

      Initiator #1 and F246 Adhesive should not be mixed in large quantities, as a vigorous chemical reaction will occur generating a significant amount of heat and vapors.

    2. Curing

      Initiator #1 and F246 Adhesive should not be mixed in large quantities, as a vigorous chemical reaction will occur generating a significant amount of heat and vapors.

    3. Clean-Up

      Unreacted initiator can be cleaned up using acetone, isopropanol, or MEK.

  • Comparable Materials for Henkel Initiator #1

    *See Terms of Use Below

    Spec Engine® Results

Questions about this material?

Henkel - Initiator #1

Get personal assistance with your specific application needs.

Your Profile Edit

Popular Articles

What Projects Require Custom Adhesive Formulations and Why?

Read Article

Testing the effectiveness of surface treatments

Read Article

An Overview of Fluid Dispensing Systems & How They’re Used

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

Who do you read or follow for engineering news and entertainment?
Fixture or Handling Strength Time Test Methods
Fixture or Handling Strength Time Fixture-Handling Strength Test Method
>5.00 min BMS test pieces, for a bond line of 0.07mm
Viscosity Test Methods
Viscosity Test Method Temperature
<60 cPs Utube 25°C
Specific Gravity Test Methods
Specific Gravity Temperature
0.9765 (g/cm3) 25°C