Henkel Lite-Lok 4001

Henkel Lite-Lok 4001 Datasheet
  • Description for Henkel Lite-Lok 4001

    An epoxy based ultraviolet light curable adhesive designed for sealing and bonding. The product combines the fast cure feature of traditional UV cure acrylates with the toughness, heat resistance and low shrinkage of an epoxy.

    *See Terms of Use Below

    Brand Bondmaster
    Application Type Bond, Seal, Adhesive: Instant Adhesives
    1 Part or 2 Part 1 Part
    Material Form Liquid
    Manufacturer Henkel
    Chemistry Epoxy
    Cure Method UV
    Cure Time (min) Fast, 0.08 to 0.17
    Viscosity (cPs) 1,000, Low
    Color Clear, Light Yellow
    Chemical Resistance Excellent water resistance
  • Technical Data for Henkel Lite-Lok 4001

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1 Part or 2 Part - 1 Part
    • Material Form
      • Liquid
    • Chemistry
    • Cure Method
      • UV / Visible Light - UV
    • Color
      • Clear / Transparent - Clear
      • Yellow - Light Yellow
    • Brand
      • Bondmaster
    Specifications
    Cure Specs
    Cure Time (min) Fast, 0.08 to 0.17
    Viscosity (cPs) 1,000, Low Test Method
    Linear Shrinkage (%) Low
    Material Resistance
    Chemical Resistance Excellent water resistance
    Other Properties
    Specific Gravity 1.070
    Flash Point (°F) >194.0
    % Solids (%) 100
    Business Information
    Shelf Life Details Uncured
    Shelf Life Temperature (°F) 36 to 81
    Shelf Life (mon) 6
  • Best Practices for Henkel Lite-Lok 4001

    *See Terms of Use Below

    1. Surface Preparation

      The surfaces should be clean and dry.

    2. Clean-Up

      Optimum cure is obtained when LITE-LOK 4001 is exposed to UV light in the spectral range from 220-280 nanometers. The time needed for curing is a combination of many factors. Some of these are: The thicker the substrate, the longer the exposure time needed for curing. The more UV light absorbing that the substrate is, the longer the exposure time needed for curing. The lower that the intensity of the UV light source is, the longer the exposure time needed for curing. The farther the distance of the product from the UV light source, the longer the exposure time needed for curing.

      LITE-LOK 4001 will typically cure when exposed for 5 to 10 seconds to a high intensity UV light source.

  • Comparable Materials for Henkel Lite-Lok 4001

    *See Terms of Use Below

    Spec Engine® Results

Questions about this material?

Get personal assistance with your specific application needs.

Your Profile Edit
  1. cdd0255f-807c-4e38-bdac-45847d10cb11
  2. cdd0255f-807c-4e38-bdac-45847d10cb11

Popular Articles

Silicones in LED Lighting | Gluespec

Read Article

Designing the proper thermal management system into your high powered electronics / Gluespec Q&A

Read Article

Testing the effectiveness of surface treatments

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

Which answer best describes a project you are currently working on?
Viscosity Test Methods
Viscosity Temperature
1,000 cPs 25°C
Low