Henkel Loctite Ablestik 56C w/ Cat 11 Datasheet Henkel Loctite Ablestik 56C w/ Cat 11

CONTACT REP
Information provided by Gluespec

  • Description for Henkel Loctite Ablestik 56C w/ Cat 11

    Two component, high temperature, general purpose. Adhesive - Electrically Conductive

    *See Terms of Use Below

    Brand Loctite, Eccobond, Ablestik, Emerson & Cuming
    Chemical Resistance Excellent
    Application Type Bond
    1 Part or 2 Part 2-Part
    Material Form Thixotropic Paste (Adhesive)
    Substrate Aluminum, Ceramics, Glass, Metals, Plastics
    Industry Electrical, Radar, Satellite, Guidance Systems, Electrical connections
    Manufacturer Henkel
    Chemistry Epoxy
    Cure Method 2-Part Cure, Heat Cure
    Cure Temperature (°C) 80, 100, 120, Low, 50
    Cure Time (min) 120 to 240, 480, 120, 60, 120
    Viscosity (cPs) No-flow characteristics
    Color Silver
    High Temperature Resistance (°C) 175
    Low Temperature Resistance (°C) -60
    Other Resistance Low Electrical Resistance
    Silver (Ag)-Filled Filler: Silver
    Volume Resistivity (O) 0.0002 (ohms/cm)

  • Technical Data for Henkel Loctite Ablestik 56C w/ Cat 11

    *See Terms of Use Below

    Overview
    • Chemical Resistance
      • Chemical Resistance - Excellent
    • Application Type
    • 1 Part or 2 Part
      • 2-Part
    • Material Form
      • Paste - Thixotropic Paste (Adhesive)
    • Substrate
    • Industry
      • Radar
      • Satellite
      • Guidance Systems
      • Electronics - Electrical, Electrical connections
    • Chemistry
    • Cure Method
      • Heat - Heat Cure
      • 2-Part Cure
    • Color
      • Gray - Silver
    • Brand
      • Ablestik
      • Loctite
      • Emerson & Cuming
      • Eccobond
    • Also Known As
      • Old Name - EccoBond 56C/Catalyst 11
    Specifications
    Cure Specs
    Cure Temperature (°C) 80, 100, 120, Low, 50
    Cure Time (min) 120 to 240, 480, 120, 60, 120
    Viscosity (cPs) No-flow characteristics
    Work / Pot Time (min) Long, >240 Test Method
    Thixotropic Thixotropic
    Mix Ratio 100:3.5 (by volume), 100:3.5 (by weight)
    Bond Strength
    General Bond Strength (psi) High bond strength
    Shear Strength (psi) 800 Test Method
    Flexural Strength (psi) 10,877 Test Method
    Tensile Strength (psi) 800 Test Method
    Material Resistance
    High Temperature Resistance (°C) 175
    Low Temperature Resistance (°C) -60
    Other Resistance Low Electrical Resistance
    Conductivity
    Electrical Conductivity (mhos/cm) Electrically conductive, High
    Thermal Conductivity (W/m°K) Ultimate, 3.00 Test Method
    Volume Resistivity (O) 0.0002 (ohms/cm) Test Method
    Other Properties
    Glass Transition Temp (Tg) (°C) 80 Test Method
    Specific Gravity 3.300
    Coefficient of Thermal Expansion (CTE) 32e-6 (K-1), 120e-6 Test Method
    Flash Point (°F) 204.1 Test Method
    Business Information
    Shelf Life Temperature (°F) 64 to 77, 68 to 77 Room temperature
    Shelf Life (mon) 12, Long

  • Best Practices for Henkel Loctite Ablestik 56C w/ Cat 11

    *See Terms of Use Below

    1. Surface Preparation

      Complete cleaning of the substrates should be performed to remove contamination such as oxide layers, dust, moisture, salt and oils which can cause poor adhesion or corrosion in a bonded part.

    2. Application

      Apply adhesive to all surfaces to be bonded and join together.

      In most applications only contact pressure is required.

    3. Mixing

      Accurately weigh LOCTITE ABLESTIK 56C and LOCTITE CAT 11 into a clean container in the recommended ratio.

      Blend components with spatula (2 to 3 minutes) and scrape the bottom and sides of the mixing container frequently to produce a uniform mixture.

    4. Curing

      Cure conditions (time and temperature) may vary based on customers' experience and their application requirements, as well as customer curing equipment, oven loading and actual oven temperatures.

  • Comparable Materials for Henkel Loctite Ablestik 56C w/ Cat 11

    *See Terms of Use Below

    Spec Engine® Results

  Download Technical Data Sheet   Save This Material   Compare View Saved Items

Popular Articles

Electrically Conductive Adhesives

Read Article

Testing the effectiveness of surface treatments

Read Article

Epoxy Adhesives for Medical Devices

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for Henkel Loctite Ablestik 56C w/ Cat 11

All Henkel Materials
View Now
Thermal Adhesives
View Now
Electrically Conductive Epoxy Adhesives
View Now
Radar
View Now

Gluespec Poll

Which answer best describes a project you are currently working on?
Work / Pot Time Test Methods
Work / Pot Time Test Method Temperature
Long
>240 min 100 g mass 25°C
Flexural Strength Test Methods
Flexural Strength Test Method
10,877 psi ASTM-D-790
Tensile Strength Test Methods
Tensile Strength Substrate Test Temperature Test Method
800 psi Aluminum to aluminum 25°C TP-21
Shear Strength Test Methods
Shear Strength Type Cure Temperature Substrate Test Method
800 psi Lap Shear 25°C Aluminum Cured
Thermal Conductivity Test Methods
Thermal Conductivity Test Method
Ultimate
3.00 W/m°K ASTM-D-2214
Volume Resistivity Test Methods
Volume Resistivity Temp (°C) Test Method
0.0002 (ohms/cm) 25°C TP-296
Coefficient of Thermal Expansion (CTE) Test Methods
Coefficient of Thermal Expansion (CTE) CTE Test Method
32e-6 (K-1) Cured, TMA, Below Tg
120e-6 Cured, TMA, Above Tg (K-1)
Density Test Methods
Density Test Method
Flash Point Test Methods
Flash Point Test Method
95.6°C Uncured
Glass Transition Temp (Tg) Test Methods
Glass Transition Temp (Tg) Glass Transition Temperature (Tg) Test Method
80°C Cured