Henkel Loctite Ablestik G 909

Henkel Loctite Ablestik G 909 Datasheet
CONTACT REP

  • Description for Henkel Loctite Ablestik G 909

    ● One component ● High strength ● Non-sag ● Thixotropic ● Excellent peel strength ● High tensile shear strength over a broad temperature range<br/>

    *See Terms of Use Below

    Brand Bondmaster, Loctite, Ablestik
    Application Type Bond
    1 Part or 2 Part 1 Part
    Material Form Paste
    Substrate High tech composite, Copper, Aluminum, Fiberglass reinforced plastics, Oily Steel, Ferrite, Dissimilar Substrates, Structural metal, Steel
    Industry Bicycle frames
    Manufacturer Henkel
    Chemistry Epoxy
    Cure Method Heat
    Cure Temperature (°C) 150, 100, 120
    Cure Time (min) Fast, 0.25, 20, 90, 30
    Viscosity (cPs) Non-sag
    Color Gray
    High Temperature Resistance (°C) 150
    Low Temperature Resistance (°C) -40

  • Technical Data for Henkel Loctite Ablestik G 909

    *See Terms of Use Below

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1 Part or 2 Part - 1 Part
    • Material Form
      • Paste
    • Substrate
    • Industry
    • Chemistry
    • Application Method
      • Dispenser
    • Cure Method
      • Heat
    • Color
      • Gray
    • Brand
      • Ablestik
      • Loctite
      • Bondmaster
    Specifications
    Cure Specs
    Cure Temperature (°C) 150, 100, 120
    Cure Time (min) Fast, 0.25, 20, 90, 30
    Viscosity (cPs) Non-sag
    Thixotropic Thixotropic
    Bond Strength
    Structural/Load-Bearing Structural
    Peel Strength (piw) Excellent, 30 Test Method
    Shear Strength (psi) High, 5,800, 2,950, 4,700 Test Method
    Impact Strength (psi) High
    Material Resistance
    High Temperature Resistance (°C) 150 Test Method
    Impact Resistance High impact resistance
    Low Temperature Resistance (°C) -40 Test Method
    Hardness
    Shore D Hardness 78, 35 Test Method
    Other Properties
    Specific Gravity 1.150 Test Method
    Business Information
    Shelf Life Temperature (°F) 32 to 39
    Shelf Life Type From date of Manufacture
    Shelf Life (mon) 5

  • Best Practices for Henkel Loctite Ablestik G 909

    *See Terms of Use Below

    1. Surface Preparation

      Complete cleaning of the substrates should be performed to remove contamination such as oxide layers, dust,moisture, salt and oils which can cause poor adhesion or corrosion in a bonded part

      Apply adhesive to all surfaces to be bonded and join together

      In most applications only contact pressure is required.

  • Comparable Materials for Henkel Loctite Ablestik G 909

    *See Terms of Use Below

    Spec Engine® Results

    • 3M
      2214 Hi-Temp New Formula Gray(3M)

      Version of 2214 with excellent performance under high temperature and high humidity • Resists hot ethylene glycol

    • Resinlab
      EP950G Gray(Resinlab)

      A one-part, aluminum filled, rubber modified, epoxy designed for bonding metals and other structural materials subject to stress at elevated temperature. It has a medium paste-like viscosity which gives very little sag upon cure at elevated temperature.

    • 3M
      2214 Hi-Temp Original Gray(3M)

      Outstanding performance at elevated temperatures • Excellent sag control

    • Compare All

    Closest Results from this Manufacturer

    • Henkel
      Loctite Ablestik G 500(Henkel)

      A one component, heat cured, gray, general purpose epoxy adhesive and sealant. It is a low viscosity, easily pumped, non-abrasive paste and features a long shelf life at room temperature. It cures to a high gloss finish with excellent resistance to heat and water and excellent dielectric properties.

    • Henkel
      ESP 314(Henkel)

      • Very High Strength • Epoxy Adhesive • Structural Bonding Applications • Structural Bonding of Dissimilar Substrates • One Component • Very High Cured Bond Strength • Sag Resistant Paste • Structural Bonding to a Wide Variety of Substrates •

    • Compare All
  Download Technical Data Sheet   Save This Material Saved Items

Questions about this material?

Get personal assistance with your specific application needs.

Your Profile Edit
  1. 52769b97-c8bb-4961-8d1e-605ec0a26f3f
  2. 52769b97-c8bb-4961-8d1e-605ec0a26f3f
Submit

Popular Articles

Epoxies in the Medical Device Industry

Read Article

Electrically Conductive Adhesives

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Testing the effectiveness of surface treatments

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

Which answer best describes a project you are currently working on?
Shear Strength Test Methods
Shear Strength Type Substrate Test Temperature
High Tensile Lap Shear Strength
5,800 psi Tensile Lap Shear Strength Aluminium 25°C
2,950 psi Tensile Lap Shear Strength Aluminium 100°C
4,700 psi Tensile Lap Shear Strength Steel 25°C
Peel Strength Test Methods
Peel Strength Type Substrate Test Method
Excellent
30 piw "T" Peel Strength Aluminum ISO 11339
High Temperature Resistance Test Methods
High Temperature Resistance Test Method
150°C Operating Temperature
Low Temperature Resistance Test Methods
Low Temperature Resistance Test Method
-40°C Operating Temperature
Shore D Hardness Test Methods
Shore D Hardness Shore Hardness Test Method
78 Cured, 25ºC
35 Cured, 120ºC
Specific Gravity Test Methods
Specific Gravity Test Method
1.150 Uncured