• Description for Henkel M1305

    • Structural Acrylic Adhesive • Fast, room temperature cure • Excellent adhesion to plastics and metals • Good toughness and durability • High peel and good impact strength • Environmentally friendly – 100% solids • VOC compliance • Excellent gap-filling capability •<br/>

    *See Terms of Use Below

    Brand Bondmaster
    Application Type Bond
    1 Part or 2 Part 2-Part
    Material Form Liquid
    Substrate Acrylic, Ceramic, Composites, Composites, FRP, Metals, ABS, Plastics, Polycarbonate, PVC, Steel, Aluminum, Thermoplastics, Thermosets
    Industry Rivets
    Manufacturer Henkel
    Chemistry Acrylic
    Cure Method Resin/Activator
    Cure Temperature (°C) 20 to 25 Room Temperature, 25
    Cure Time (min) Fast, 480
    Viscosity (cPs) 200,000
    Color Stone, Straw
    High Temperature Resistance (°C) 138
    Low Temperature Resistance (°C) -85
    Durability Toughness, Durability
  • Technical Data for Henkel M1305

    Overview
    Specifications
    Cure Specs
    Cure Temperature (°C) 20 to 25 Room Temperature, 25
    Cure Time (min) Fast, 480
    Viscosity (cPs) 200,000 Test Method
    Fixture or Handling Strength Time (min) 10 to 15 Test Method
    Work / Pot Time (min) 5.00 Test Method
    Mix Ratio 1:1 (by volume), 1:1 (by weight)
    Bond Strength
    Structural/Load-Bearing Structural
    General Bond Strength (psi) Excellent
    Peel Strength (piw) High, 20 to 25 Test Method
    Shear Strength (psi) Superior, 3,300, 3,400, 600, 600, 750, 700 Test Method
    Impact Strength (psi) Good, 20 Test Method
    Material Resistance
    High Temperature Resistance (°C) 138
    Low Temperature Resistance (°C) -85
    Hardness
    Durability Toughness, Durability
    Flexibility Flexibility
    Other Properties
    Specific Gravity 1.010
    Flash Point (°F) 50.0
    % Solids (%) 100
    Business Information
    Shelf Life Details Shelf Life Test Method, Shelf Life Test Method, BONDMASTER M1305 has a shelf life of 6 months when stored between 5°C-25°C (40°F- 77°F).Keep away from excessive heat, sparks, flame, and sunlight.
    Shelf Life (mon) 6, 6, 6
  • Best Practices for Henkel M1305

    *See Terms of Use Below

    1. Surface Preparation

      The adhesive will adhere well to most surfaces without special preparation. For highest bond strength and optimum performance, the bonding surfaces should be clean and dry, and free from surface contaminants.

    2. Application

      The adhesive should be applied as a bead on the part.

      Parts should be assembled within 5 minutes of adhesive application.

      Parts should be clamped for 10 to 15 minutes until handling strength is obtained.

    3. Clean-Up

      Unreacted adhesive can be cleaned up using acetone, isopropanol, or MEK.

  • Comparable Materials for Henkel M1305

    *See Terms of Use Below

    Spec Engine® Results

Popular Articles

Testing the effectiveness of surface treatments

Read Article

What Projects Require Custom Adhesive Formulations and Why?

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Plastic Bonding with Adhesives - Considerations Q&A

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Gluespec Poll

When you're researching or sourcing materials online, what device are you using?
Fixture or Handling Strength Time Test Methods
Fixture or Handling Strength Time Fixture-Handling Strength Time Temperature
10 to 15 min 25°C
Viscosity Test Methods
Viscosity Temperature
200,000 cPs 25°C
Work / Pot Time Test Methods
Work / Pot Time Temperature
5.00 min 25°C
Shear Strength Test Methods
Shear Strength Type Substrate Test Temperature Test Method
Superior
3,300 psi Lap shear strength Steel/Steel 25°C ASTM D1002
3,400 psi Lap shear strength Aluminum/Aluminum 25°C ASTM D1002
600 psi Lap shear strength Acrylic/Acrylic 25°C ASTM D1002, Substrate failure
600 psi Lap shear strength ABS/ABS 25°C ASTM D1002, Substrate failure
750 psi Lap shear strength Polycarbonate/Polycarbonate 25°C ASTM D1002
700 psi Lap shear strength PVC/PVC 25°C ASTM D1002
Peel Strength Test Methods
Peel Strength Substrate Test Method
High
20 to 25 piw Steel/Steel ASTM 1876
Impact Strength Test Methods
Impact Strength Substrate Test Method
Good
20 psi Steel/Steel ASTM 950