• Description for Henkel M1315

    • Structural Acrylic Adhesive • Room temperature cure • Moderate cure rate • Excellent adhesion to plastics and metals • Good toughness and durability • Environmentally friendly – 100% solids • VOC compliance • Excellent gap-filling capability • High peel and good impact strength •<br/>

    *See Terms of Use Below

    Brand Bondmaster
    Application Type Bond
    1 Part or 2 Part 2 Part
    Material Form Liquid
    Substrate Acrylic, Ceramics, Composites, Fiber Glass, Metals, Nylon, ABS, Polystyrenes, Polycarbonate, PVC, Steel, Aluminum, Plated Metals, Composites, Plastics, Reinforced plastic
    Manufacturer Henkel
    Chemistry Acrylic
    Cure Method Resin/Activator
    Cure Temperature (°C) 20 to 25 Room Temperature, 25
    Cure Time (min) Moderate, 480
    Viscosity (cPs) 200,000
    Color Stone, Straw
    High Temperature Resistance (°C) 138
    Low Temperature Resistance (°C) -85
    Durability Toughness, Durability
  • Technical Data for Henkel M1315

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1 Part or 2 Part - 2 Part
      • Part A Name - Resin
      • Part B Name - Activator
    • Material Form
      • Liquid
    • Substrate
    • Industry
    • Chemistry
    • Cure Method
      • 2-Part Cure - Resin/Activator
    • Color
      • Gray - Stone
      • Yellow - Straw
    • Brand
      • Bondmaster
    Specifications
    Cure Specs
    Cure Temperature (°C) 20 to 25 Room Temperature, 25
    Cure Time (min) Moderate, 480
    Viscosity (cPs) 200,000 Test Method
    Fixture or Handling Strength Time (min) 45 Test Method
    Work / Pot Time (min) 15 Test Method
    Mix Ratio 1:1 (by volume), 1:1 (by weight)
    Bond Strength
    Structural/Load-Bearing Structural
    General Bond Strength (psi) Excellent
    Peel Strength (piw) High, 20 to 25 Test Method
    Shear Strength (psi) Superior, 4,200, 3,300, 650, 700, 650, 650 Test Method
    Impact Strength (psi) Good, 20 Test Method
    Material Resistance
    High Temperature Resistance (°C) 138
    Low Temperature Resistance (°C) -85
    Hardness
    Durability Toughness, Durability
    Flexibility Flexibility
    Other Properties
    Specific Gravity 1.010
    Flash Point (°F) 50.0
    % Solids (%) 100
    Business Information
    Shelf Life Details Shelf Life Test Method, Shelf Life Test Method, BONDMASTER M1315 has a shelf life of 6 months when stored at 5°C-25°C (40°F-77°F). Keep away from excessive heat, sparks, flame, and sunlight., A note of caution: Before opening, the containers must be warmed to room temperature otherwise water might condense into the bottle and cause hardening of the adhesive.
    Shelf Life (mon) 6, 6, 6
  • Best Practices for Henkel M1315

    *See Terms of Use Below

    1. Surface Preparation

      The adhesive will adhere well to most surfaces without special preparation. For highest bond strength and optimum performance, the bonding surfaces should be clean and dry, and free from surface contaminants.

    2. Application

      The adhesive should be applied as a bead on the part.

      Parts should be assembled within 15 minutes of adhesive application.

      Parts should be clamped for 45 minutes until handling strength is obtained.

    3. Clean-Up

      Unreacted adhesive can be cleaned up using acetone, isopropanol, or MEK.

  • Comparable Materials for Henkel M1315

    *See Terms of Use Below

    Spec Engine® Results

Questions about this material?

Get personal assistance with your specific application needs.

Your Profile Edit
  1. ae45515c-940f-4906-8da5-947e97e536bf
  2. ae45515c-940f-4906-8da5-947e97e536bf

Popular Articles

Testing the effectiveness of surface treatments

Read Article

What Projects Require Custom Adhesive Formulations and Why?

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

An Overview of Fluid Dispensing Systems & How They’re Used

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

What level of expertise do you have in specialty chemicals like adhesives, sealants, conformal coatings, etc.?
Fixture or Handling Strength Time Test Methods
Fixture or Handling Strength Time Fixture-Handling Strength Time Temperature
45 min 25°C
Viscosity Test Methods
Viscosity Test Method Temperature
200,000 cPs Thixotropic 25°C
Work / Pot Time Test Methods
Work / Pot Time Temperature
15 min 25°C
Shear Strength Test Methods
Shear Strength Type Substrate Test Temperature Test Method
Superior
4,200 psi Lap shear strength Steel/Steel 25°C ASTM D1002
3,300 psi Lap shear strength Aluminum/Aluminum 25°C ASTM D1002
650 psi Lap shear strength Acrylic/Acrylic 25°C ASTM D1002, Substrate failure
700 psi Lap shear strength ABS/ABS 25°C ASTM D1002, Substrate failure
650 psi Lap shear strength Polycarbonate/Polycarbonate 25°C ASTM D1002
650 psi Lap shear strength PVC/PVC 25°C ASTM D1002
Peel Strength Test Methods
Peel Strength Substrate Test Method
High
20 to 25 piw Steel/Steel ASTM 1876
Impact Strength Test Methods
Impact Strength Substrate Test Method
Good
20 psi Steel/Steel ASTM 950