

-
Description for Henkel P5000
• One-component Polyurethane Adhesive/Sealant • Full Cure at Room Temperature • Easy to Use and Apply<br/>• Bonds and Seals at the same time • Adhesion to a Wide Variety of Substrates • Excellent Resistance to Weathering • Very Flexible • Excellent Impact Resistance • Paintable and can be Sanded •<br/>Brand Bondmaster Chemical Resistance Salt spray oil, Diesel, Transmission fluid Application Type Bond, Repair, Seal 1 Part or 2 Part 1-Part Material Form Paste Substrate Aluminum, Composite, Glass, Pre-painted Metals, Many Plastic, Steel, Wood Industry Exterior panels, General purpose sealing, Manufacturing and repair of RV utility bodies, Manufacturing and repair of trucks , Manufacturing and repair of trailers, Manufacturing and repair of RV utility bodies, Interior panels Manufacturer Henkel Chemistry Polyurethane Cure Method Atmospheric moisture Application Temperature (°F) 39 to 111 Cure Temperature (°C) 20 to 25, 25 Cure Time (min) fast, 1,440 Viscosity (cPs) Paste Color Gray, White High Temperature Resistance (°C) 94 Low Temperature Resistance (°C) -40 -
Technical Data for Henkel P5000
Overview
-
Chemical Resistance
- Chemical Resistance - Salt spray oil, Diesel, Transmission fluid
-
Application Type
- Adhesive - Bond
- Repair & Maintenance - Repair
- Sealant - Seal
-
1 Part or 2 Part
- 1-Part
-
Material Form
- Paste
-
Industry
- Utility - Manufacturing and repair of RV utility bodies
- Trucks - Manufacturing and repair of trucks
- Trailer - Manufacturing and repair of trailers
- Recreational Vehicles - Manufacturing and repair of RV utility bodies
- Interior - Interior panels
- General Purpose - General purpose sealing
- Construction
- Construction Exterior - Exterior panels
- Other - Floors, Roofs, Trims
-
Chemistry
-
Cure Method
- Moisture / Condensation Cure - Atmospheric moisture
-
Color
- Gray
- White
-
Brand
- Bondmaster
Specifications
Cure Specs
Application Temperature (°F) 39 to 111 Cure Temperature (°C) 20 to 25, 25 Test Method Cure Time (min) fast, 1,440 Test Method Viscosity (cPs) Paste Test Method Tack Free Time (min) 45 to 60 Test Method Bond Strength
Tensile Strength (psi) 350 Test Method Material Resistance
Environmental Resistance Excellent weather resistance High Temperature Resistance (°C) 94 Impact Resistance Excellent Impact Resistance Low Temperature Resistance (°C) -40 Moisture/Humidity Resistance Good Humidity Resistance Hardness
Shore A Hardness 45 to 50 Test Method Elongation (%) <700 Test Method Flexibility Very Flexible, permanently flexible Other Properties
Specific Gravity 1.000 Flash Point (°F) 149.0 Business Information
Shelf Life Details Shelf Life Details, Bondmaster P5000 has a shelf life of one year when stored at or below 27°C (80°F). Do not freeze. Store in a cool and dry place. Shelf Life Temperature (°F) 77, <81 Shelf Life (mon) 12, 12 Not Good For
Don't Use For frozen surfaces Don't Use With Silicone -
-
Best Practices for Henkel P5000
-
Design
Joint design may affect the performance of Bondmaster P5000
-
Surface Preparation
All surfaces to be bonded should be free of dust, dirt, rust or other loose particles. For optimum performance, solvent wiping with isopropyl alcohol is recommended.
-
Application
The adhesive should be applied between 4°C (40°F) and 44°C (110°F). When Bondmaster P5000 is used as an adhesive, assemble parts within 15 minutes. Do not apply Bondmaster P5000 to frozen surfaces, over silicones or in the presence of curing silicones.
-
Curing
Avoid contact with solvents and alcohols during curing
-
-
Comparable Materials for Henkel P5000
Spec Engine® Results
Closest Results from this Manufacturer
Popular Articles
Anaerobic Adhesives
Read ArticleTesting the effectiveness of surface treatments
Read ArticleInfographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation
Read ArticleWhat Are the Differences Between Adhesives and Sealants?
Read ArticleSponsored Articles
Unique Advantages of Contact Adhesives
Read ArticleUsing LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials
Read ArticleSylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:
Read ArticleCase Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive
Read ArticleFeatured Ads

Cure Temperature Test Methods
Cure Temperature | Cure Time Test Method |
---|---|
20 to 25°C | |
25°C | @ room temperature on cold rolled steel, 25°C (77°F), 50% RH |
Cure Time Test Methods
Cure Time | Test Method |
---|---|
fast | |
1,440 min | @ room temperature on cold rolled steel, 25°C (77°F), 50% RH |
Tack Free Time Test Methods
Tack Free Time | Tack Free Temperature | Test Method |
---|---|---|
45 to 60 min | 25°C | @ room temperature on cold rolled steel, 25°C (77°F ), 50% RH |
Viscosity Test Methods
Viscosity | Temperature |
---|---|
Paste | 25°C |
Tensile Strength Test Methods
Tensile Strength | Test Method |
---|---|
350 psi | Ultimate |
Elongation Test Methods
Elongation | Test Method |
---|---|
<700 % | Material was cured for 1 week at 77°F and 50% RH, ASTM D1002 |
Shore A Hardness Test Methods
Shore A Hardness | Shore Hardness Test Method |
---|---|
45 to 50 | Material was cured for 1 week at 77°F and 50% RH, ASTM D1002 |