Application Type ESD 1 Part or 2 Part 1 Part Material Form Liquid Substrate Suitable to use on vinyl, linoleum, Ceramic tile Industry Electronic facilities Manufacturer ACL Staticide Chemistry Water-based , Polyurethane, Free of formaldehyde, phthalates, alkalis, acids, and ammonia., Non-toxic, Low V.O.C. Key Specifications RoHS compliant, UL listed for slip resistance
Technical Data for ACL Staticide Staticide Ultra ESD Floor Finish
- Anti-Static - ESD
1 Part or 2 Part
- 1 Part or 2 Part - 1 Part
- Ceramic - Ceramic tile
- Vinyl - Suitable to use on vinyl, linoleum
- RoHS (Restriction of Hazardous Substances) - RoHS compliant
- UL (Underwriters Laboratory), ULC (Underwriters Laboratories of Canada), NFPA (National Fire Protection Association) - UL listed for slip resistance
Abrasion Resistance Superior abrasion resistance
Surface Resistivity (O) e8 -e9 ohms per square,
% Solids (%) 15 to 25
Shelf Life (mon) 18
Best Practices for ACL Staticide Staticide Ultra ESD Floor Finish
Clean floor and apply two thin coats of floor finish with a dedicated rayonmop. Wait one hour between coats .Consult application procedure for details and precise instructions.
Sweep or damp mop daily to remove dirt. Periodically clean with a 1:1 dilution of water and floor finish. Apply a thin top coat of floor finish every 4 – 6 weeks. For heavy cleaning, use the 4100 Restorer Cleaner. Consult maintenance procedure for details and precise instructions.
Comparable Materials for ACL Staticide Staticide Ultra ESD Floor Finish
Spec Engine® Results
Questions about this material?
Get personal assistance with your specific application needs.