Dow HS VI High Strength Mold Making Silicone Rubber Datasheet Dow HS VI High Strength Mold Making Silicone Rubber

CONTACT REP
Information provided by Gluespec

  • Description for Dow HS VI High Strength Mold Making Silicone Rubber

    High tear strength; lowest durometer; lowest mixed viscosity well suited for one part molds.

    Note: This material has been discontinued. Please view the Comparable Materials tab or call us at (262) 293-7970 for additional help.

    *See Terms of Use Below

    Application Type Mold-Making
    1 Part or 2 Part 2-Part
    Material Form Liquid
    Manufacturer Dow
    Chemistry Silicone Rubber
    Cure Method 2-Part Cure
    Viscosity (cPs) 17,000, Low

  • Technical Data for Dow HS VI High Strength Mold Making Silicone Rubber

    *See Terms of Use Below

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 2-Part
    • Material Form
      • Liquid
    • Chemistry
    • Cure Method
      • 2-Part Cure
    Specifications
    Cure Specs
    Viscosity (cPs) 17,000, Low
    Linear Shrinkage (%) 0.14, 0.30 Test Method
    Mix Ratio 10:1 (by volume)
    Bond Strength
    General Bond Strength (psi) High
    Tear Strength (piw) 100, High
    Hardness
    Shore A Hardness 5
    Elongation (%) 7
    Other Properties
    Flash Point (°F) 199.4

  • Best Practices

    Best Practices information currently not available.

  • Comparable Materials for Dow HS VI High Strength Mold Making Silicone Rubber

    *See Terms of Use Below

    Spec Engine® Results

  Save This Material   Compare View Saved Items

Popular Articles

Testing the effectiveness of surface treatments

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Electrically Conductive Adhesives

Read Article

6 objects held together by adhesives you probably can't live without

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for Dow HS VI High Strength Mold Making Silicone Rubber

All Dow Materials
View Now

Gluespec Poll

When you're researching or sourcing materials online, what device are you using?
Linear Shrinkage Test Methods
Linear Shrinkage Test Method
0.14 % After 24 hours
0.30 % After 7 days