Elantas (Altana) Conapoxy FR-1046 w/ EA-02 Hardener Datasheet Elantas (Altana) Conapoxy FR-1046 w/ EA-02 Hardener

Information provided by Gluespec
  • Description for Elantas (Altana) Conapoxy FR-1046 w/ EA-02 Hardener

    A low cost, epoxy potting and casting system. Major characteristics include: low viscosity, low shrinkage, low exotherm, excellent resistance to thermal shock, and very good electrical insulation properties.

    *See Terms of Use Below

    Brand Cytec, Conapoxy
    Application Type Cast, Pot, Encapsulate
    1 Part or 2 Part 2-Part
    Material Form Liquid
    Industry Electrical
    Manufacturer Elantas (Altana)
    Chemistry Epoxy
    Cure Method 2 Parts
    Cure Temperature (°C) 20 to 25 Room Temperature, 25 Room Temperature, 60, 150
    Cure Time (min) 1,440, 120
    Viscosity (cPs) Low, 6,800
    Color Black, Clear Amber, Clear Amber
    High Temperature Resistance (°C) Excellent thermal shock resistance.
    Volume Resistivity (O) 6.0e15 (ohms/cm)
  • Technical Data for Elantas (Altana) Conapoxy FR-1046 w/ EA-02 Hardener

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 2-Part
    • Material Form
      • Liquid
    • Industry
    • Chemistry
    • Cure Method
      • 2-Part Cure - 2 Parts
    • Color
      • Black
      • Clear / Transparent - Clear Amber
      • Red - Clear Amber
    • Brand
      • Conapoxy
      • Cytec
    Specifications
    Cure Specs
    Cure Temperature (°C) 20 to 25 Room Temperature, 25 Room Temperature, 60, 150
    Cure Time (min) 1,440, 120, 0.00
    Viscosity (cPs) Low, 6,800 Test Method
    Set Time (min) 30 Test Method
    Linear Shrinkage (%) 0.012 (in/in), Low
    Work / Pot Time (min) Short, 30
    Mix Ratio 100:5.5 (by weight)
    Bond Strength
    Compressive Strength (psi) 17,000
    Tensile Strength (psi) 6,600
    Material Resistance
    High Temperature Resistance (°C) Excellent thermal shock resistance.
    Conductivity
    Dissipation Factor 0.00500 Test Method
    Filler Non-abrasive
    Dielectric Strength (V/mil) 375 (vpm), Very Good
    Dielectric Constant 5.54 Test Method
    Surface Resistivity (O) 5.0e15 (ohm-cm)
    Volume Resistivity (O) 6.0e15 (ohms/cm)
    Hardness
    Shore D Hardness 85 to 90
    Flexibility Rigid
    Other Properties
    Glass Transition Temp (Tg) (°C) 68
    Specific Gravity 1.580 Test Method
    Coefficient of Thermal Expansion (CTE) 34e-6 (in./ in/°C)
    Business Information
    Shelf Life Details The shelf life of CONAPOXY® FR-1046 resin and CONACURE® hardeners is 18 months from date of manufacture when stored in the original unopened container.
    Shelf Life Type From date of manufacture
    Shelf Life (mon) 18
  • Best Practices for Elantas (Altana) Conapoxy FR-1046 w/ EA-02 Hardener

    *See Terms of Use Below

    1. Application

      Please mix before use.

      Use only in well-ventilated areas. Adequate ventilation should be provided during and immediately after application.

  • Comparable Materials for Elantas (Altana) Conapoxy FR-1046 w/ EA-02 Hardener

    *See Terms of Use Below

    Spec Engine® Results

Popular Articles

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Testing the effectiveness of surface treatments

Read Article

Epoxies in the Aerospace Industry

Read Article

The effectiveness of adhesives in the wind power industry

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for Elantas (Altana) Conapoxy FR-1046 w/ EA-02 Hardener

Gluespec Poll

When you're researching or sourcing materials online, what device are you using?
Set Time Test Methods
Set Time Set Temperature
30 min 25°C Room Temperature
Viscosity Test Methods
Viscosity Temperature
Low
6,800 cPs 25°C Room Temperature
Dielectric Constant Test Methods
Dielectric Constant Temperature Test Method
5.54 25°C Room Temperature Dielectric constant @ 100 Hz
Dissipation Factor Test Methods
Dissipation Factor Temperature Test Method
0.00500 25°C Room Temperature Dissipation Factor @ 100 Hz
Specific Gravity Test Methods
Specific Gravity Temperature
1.580 25°C Room Temprature