

-
Description for Elantas (Altana) Conapoxy FR-1046 w/ EA-87 Hardener
A low cost, epoxy potting and casting system. Major characteristics include: low viscosity, low shrinkage, low exotherm, excellent resistance to thermal shock, and very good electrical insulation properties.Brand Cytec, Conapoxy Application Type Cast, Pot, Encapsulate 1 Part or 2 Part 2-Part Material Form Liquid Industry Electrical Manufacturer Elantas (Altana) Chemistry Epoxy Cure Method 2 Parts Cure Temperature (°C) 25 Room Temperature, 60, 150 Cure Time (min) 1,440, 120 Viscosity (cPs) Low, 2,000 Color Black, Light Amber High Temperature Resistance (°C) Excellent Thermal Shock resistance Volume Resistivity (O) 1.0e16 (ohms/cm) -
Technical Data for Elantas (Altana) Conapoxy FR-1046 w/ EA-87 Hardener
Overview
-
Application Type
- Casting / Moldmaking - Cast
- Pottant / Encapsulant - Pot, Encapsulate
-
1 Part or 2 Part
- 2-Part
-
Material Form
- Liquid
-
Industry
- Electronics - Electrical
-
Chemistry
-
Cure Method
- 2-Part Cure - 2 Parts
-
Color
- Black
- Red - Light Amber
-
Brand
- Conapoxy
- Cytec
Specifications
Cure Specs
Cure Temperature (°C) 25 Room Temperature, 60, 150 Cure Time (min) 1,440, 120 Viscosity (cPs) Low, 2,000 Test Method Set Time (min) 50 Test Method Linear Shrinkage (%) 0.001 (in/in), Low Work / Pot Time (min) 50, Moderate Mix Ratio 100:18 (by weight) Bond Strength
Compressive Strength (psi) 15,000 Tensile Strength (psi) 7,700 Material Resistance
High Temperature Resistance (°C) Excellent Thermal Shock resistance Conductivity
Dissipation Factor 0.00500 Test Method Filler Non-abrasive Dielectric Strength (V/mil) 375 (vpm), Very Good Dielectric Constant 4.83 Test Method Surface Resistivity (O) 6.0e17 (Ohm-cm) Volume Resistivity (O) 1.0e16 (ohms/cm) Hardness
Shore D Hardness 85 to 90 Flexibility Limited flexibility Other Properties
Glass Transition Temp (Tg) (°C) 52 Specific Gravity 1.480 Test Method Coefficient of Thermal Expansion (CTE) 36e-6 (in./in./°C) Business Information
Shelf Life Details The shelf life of CONAPOXY FR-1046 resin and CONACURE hardeners is 18 months from date of manufacture when stored in the original unopened container. Shelf Life Temperature (°F) 68 to 86 Shelf Life Type From date of manufacture Shelf Life (mon) 18 -
-
Best Practices for Elantas (Altana) Conapoxy FR-1046 w/ EA-87 Hardener
-
Application
Please mix before use.
Use only in well-ventilated areas. Adequate ventilation should be provided during and immediately after application.
-
-
Comparable Materials for Elantas (Altana) Conapoxy FR-1046 w/ EA-87 Hardener
Spec Engine® Results
Popular Articles
Epoxies in the Aerospace Industry
Read ArticleThe effectiveness of adhesives in the wind power industry
Read ArticleTesting the effectiveness of surface treatments
Read ArticleInfographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation
Read ArticleSponsored Articles
Unique Advantages of Contact Adhesives
Read ArticleUsing LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials
Read ArticleSylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:
Read ArticleCase Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive
Read ArticleFeatured Ads

Set Time Test Methods
Set Time | Set Temperature |
---|---|
50 min | 25°C Room Temperature |
Viscosity Test Methods
Viscosity | Temperature |
---|---|
Low | |
2,000 cPs | 25°C Room Temperature |
Dielectric Constant Test Methods
Dielectric Constant | Temperature | Test Method |
---|---|---|
4.83 | 25°C Room Temperature | Dielectric constant @ 100 Hz |
Dissipation Factor Test Methods
Dissipation Factor | Temperature | Test Method |
---|---|---|
0.00500 | 25°C Room Temperature | Dissipation Factor @ 100 Hz |
Specific Gravity Test Methods
Specific Gravity | Temperature |
---|---|
1.480 | 25°C Room Temperature |

1 VIEW FREE
Don't Leave!
View Elantas (Altana) - Conapoxy FR-1046 w/ EA-87 Hardener now.